Fabrication and characterization of polycaprolactone cross- linked and highly-aligned 3-D artificial scaffolds for bone tissue regeneration via electrospinning technology

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

6 Цитирования (Scopus)

Выдержка

Novel technologies allowed the scientific community to develop scaffolds for regeneration of bone tissue. A successful scaffold should possess specific macroscopic geometry and internal architecture to perform biological and biophysical functions. In this study the process of polycaprolactone microfibrous development with either cross-linked or highly-aligned three-dimensional artificial mats via electrospinning technology for potential application in tissue engineering is described. The morphology and size of electrospun fibers were assessed systematically by varying the rotation speed of grounded collector. It was found that the diameter of the fibers decreased by increasing the rotation speed of collector. The morphology of the fibers changed from cross-linked to highly-aligned at appr. 1000-1100 rpm.

Язык оригиналаАнглийский
Название основной публикацииIOP Conference Series: Materials Science and Engineering
ИздательInstitute of Physics Publishing
Том98
Издание1
DOI
СостояниеОпубликовано - 3 ноя 2015
Событие3rd International Youth Conference on Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology, Nanobiotech 2015 - Tambov, Российская Федерация
Продолжительность: 21 мая 201522 мая 2015

Другое

Другое3rd International Youth Conference on Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology, Nanobiotech 2015
СтранаРоссийская Федерация
ГородTambov
Период21.5.1522.5.15

Отпечаток

Tissue regeneration
Polycaprolactone
Electrospinning
Scaffolds
Bone
Fabrication
Fibers
Bioelectric potentials
Tissue engineering
Tissue
Geometry
polycaprolactone

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Цитировать

Fabrication and characterization of polycaprolactone cross- linked and highly-aligned 3-D artificial scaffolds for bone tissue regeneration via electrospinning technology. / Gorodzha, Svetlana Nikolaevna; Surmeneva, M. A.; Surmenev, R. A.

IOP Conference Series: Materials Science and Engineering. Том 98 1. ред. Institute of Physics Publishing, 2015. 012024.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Gorodzha, SN, Surmeneva, MA & Surmenev, RA 2015, Fabrication and characterization of polycaprolactone cross- linked and highly-aligned 3-D artificial scaffolds for bone tissue regeneration via electrospinning technology. в IOP Conference Series: Materials Science and Engineering. 1 ред., том. 98, 012024, Institute of Physics Publishing, Tambov, Российская Федерация, 21.5.15. https://doi.org/10.1088/1757-899X/98/1/012024
@inproceedings{7532bdf2361b444d8108bcc4e6d9f67e,
title = "Fabrication and characterization of polycaprolactone cross- linked and highly-aligned 3-D artificial scaffolds for bone tissue regeneration via electrospinning technology",
abstract = "Novel technologies allowed the scientific community to develop scaffolds for regeneration of bone tissue. A successful scaffold should possess specific macroscopic geometry and internal architecture to perform biological and biophysical functions. In this study the process of polycaprolactone microfibrous development with either cross-linked or highly-aligned three-dimensional artificial mats via electrospinning technology for potential application in tissue engineering is described. The morphology and size of electrospun fibers were assessed systematically by varying the rotation speed of grounded collector. It was found that the diameter of the fibers decreased by increasing the rotation speed of collector. The morphology of the fibers changed from cross-linked to highly-aligned at appr. 1000-1100 rpm.",
author = "Gorodzha, {Svetlana Nikolaevna} and Surmeneva, {M. A.} and Surmenev, {R. A.}",
year = "2015",
month = "11",
day = "3",
doi = "10.1088/1757-899X/98/1/012024",
language = "English",
volume = "98",
booktitle = "IOP Conference Series: Materials Science and Engineering",
publisher = "Institute of Physics Publishing",
edition = "1",

}

TY - GEN

T1 - Fabrication and characterization of polycaprolactone cross- linked and highly-aligned 3-D artificial scaffolds for bone tissue regeneration via electrospinning technology

AU - Gorodzha, Svetlana Nikolaevna

AU - Surmeneva, M. A.

AU - Surmenev, R. A.

PY - 2015/11/3

Y1 - 2015/11/3

N2 - Novel technologies allowed the scientific community to develop scaffolds for regeneration of bone tissue. A successful scaffold should possess specific macroscopic geometry and internal architecture to perform biological and biophysical functions. In this study the process of polycaprolactone microfibrous development with either cross-linked or highly-aligned three-dimensional artificial mats via electrospinning technology for potential application in tissue engineering is described. The morphology and size of electrospun fibers were assessed systematically by varying the rotation speed of grounded collector. It was found that the diameter of the fibers decreased by increasing the rotation speed of collector. The morphology of the fibers changed from cross-linked to highly-aligned at appr. 1000-1100 rpm.

AB - Novel technologies allowed the scientific community to develop scaffolds for regeneration of bone tissue. A successful scaffold should possess specific macroscopic geometry and internal architecture to perform biological and biophysical functions. In this study the process of polycaprolactone microfibrous development with either cross-linked or highly-aligned three-dimensional artificial mats via electrospinning technology for potential application in tissue engineering is described. The morphology and size of electrospun fibers were assessed systematically by varying the rotation speed of grounded collector. It was found that the diameter of the fibers decreased by increasing the rotation speed of collector. The morphology of the fibers changed from cross-linked to highly-aligned at appr. 1000-1100 rpm.

UR - http://www.scopus.com/inward/record.url?scp=84960931296&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960931296&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/98/1/012024

DO - 10.1088/1757-899X/98/1/012024

M3 - Conference contribution

AN - SCOPUS:84960931296

VL - 98

BT - IOP Conference Series: Materials Science and Engineering

PB - Institute of Physics Publishing

ER -