Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition

S. A. Bochkareva, N. Yu Grishaeva, B. A. Lyukshin, S. V. Panin, N. Yu Matolygina, I. L. Panov, D. A. Nguyen, A. V. Byakov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

New composites based on polyetheretherketone (PEEK) resin with specified physical-mechanical properties are developed with the use of experimental data on the dependence of effective properties (volumetric wear, modulus of elasticity, value of elongation at break, etc.) versus the values of control parameters. The loading (content) of short (milled) carbon fibers (200 μm) and PTFE particles (5-15 μm) are used as the control parameters. In order to attain the necessary number of reference points a numerical technique is employed that ensures their supplementing up to a regular array with the use of linear interpolation. The obtained dependences of the effective properties versus the control parameters are constructed in the form of surfaces and corresponding isolines. In doing so, a region with the required range of effective properties values is allocated at the isolines graphs. Then, the variety regions are overlapped, whereas their intersection determines the range of the control parameters that provides the effective characteristics to take the required values.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
РедакторыVasily M. Fomin, Victor E. Panin, Sergey G. Psakhie
ИздательAmerican Institute of Physics Inc.
Том2051
ISBN (электронное издание)9780735417779
DOI
СостояниеОпубликовано - 12 дек 2018
СобытиеInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20185 окт 2018

Конференция

КонференцияInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018
СтранаРоссийская Федерация
ГородTomsk
Период1.10.185.10.18

Отпечаток

PEEK
composite materials
carbon fibers
resins
intersections
elongation
interpolation
modulus of elasticity
mechanical properties

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Bochkareva, S. A., Grishaeva, N. Y., Lyukshin, B. A., Panin, S. V., Matolygina, N. Y., Panov, I. L., ... Byakov, A. V. (2018). Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition. В V. M. Fomin, V. E. Panin, & S. G. Psakhie (Ред.), Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures (Том 2051). [020034] American Institute of Physics Inc.. https://doi.org/10.1063/1.5083277

Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition. / Bochkareva, S. A.; Grishaeva, N. Yu; Lyukshin, B. A.; Panin, S. V.; Matolygina, N. Yu; Panov, I. L.; Nguyen, D. A.; Byakov, A. V.

Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. ред. / Vasily M. Fomin; Victor E. Panin; Sergey G. Psakhie. Том 2051 American Institute of Physics Inc., 2018. 020034.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Bochkareva, SA, Grishaeva, NY, Lyukshin, BA, Panin, SV, Matolygina, NY, Panov, IL, Nguyen, DA & Byakov, AV 2018, Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition. в VM Fomin, VE Panin & SG Psakhie (ред.), Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. том. 2051, 020034, American Institute of Physics Inc., Tomsk, Российская Федерация, 1.10.18. https://doi.org/10.1063/1.5083277
Bochkareva SA, Grishaeva NY, Lyukshin BA, Panin SV, Matolygina NY, Panov IL и соавт. Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition. В Fomin VM, Panin VE, Psakhie SG, редакторы, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Том 2051. American Institute of Physics Inc. 2018. 020034 https://doi.org/10.1063/1.5083277
Bochkareva, S. A. ; Grishaeva, N. Yu ; Lyukshin, B. A. ; Panin, S. V. ; Matolygina, N. Yu ; Panov, I. L. ; Nguyen, D. A. ; Byakov, A. V. / Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition. Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. редактор / Vasily M. Fomin ; Victor E. Panin ; Sergey G. Psakhie. Том 2051 American Institute of Physics Inc., 2018.
@inproceedings{c06444aa366b41f7ada69cab380e34db,
title = "Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition",
abstract = "New composites based on polyetheretherketone (PEEK) resin with specified physical-mechanical properties are developed with the use of experimental data on the dependence of effective properties (volumetric wear, modulus of elasticity, value of elongation at break, etc.) versus the values of control parameters. The loading (content) of short (milled) carbon fibers (200 μm) and PTFE particles (5-15 μm) are used as the control parameters. In order to attain the necessary number of reference points a numerical technique is employed that ensures their supplementing up to a regular array with the use of linear interpolation. The obtained dependences of the effective properties versus the control parameters are constructed in the form of surfaces and corresponding isolines. In doing so, a region with the required range of effective properties values is allocated at the isolines graphs. Then, the variety regions are overlapped, whereas their intersection determines the range of the control parameters that provides the effective characteristics to take the required values.",
author = "Bochkareva, {S. A.} and Grishaeva, {N. Yu} and Lyukshin, {B. A.} and Panin, {S. V.} and Matolygina, {N. Yu} and Panov, {I. L.} and Nguyen, {D. A.} and Byakov, {A. V.}",
year = "2018",
month = "12",
day = "12",
doi = "10.1063/1.5083277",
language = "English",
volume = "2051",
editor = "Fomin, {Vasily M.} and Panin, {Victor E.} and Psakhie, {Sergey G.}",
booktitle = "Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition

AU - Bochkareva, S. A.

AU - Grishaeva, N. Yu

AU - Lyukshin, B. A.

AU - Panin, S. V.

AU - Matolygina, N. Yu

AU - Panov, I. L.

AU - Nguyen, D. A.

AU - Byakov, A. V.

PY - 2018/12/12

Y1 - 2018/12/12

N2 - New composites based on polyetheretherketone (PEEK) resin with specified physical-mechanical properties are developed with the use of experimental data on the dependence of effective properties (volumetric wear, modulus of elasticity, value of elongation at break, etc.) versus the values of control parameters. The loading (content) of short (milled) carbon fibers (200 μm) and PTFE particles (5-15 μm) are used as the control parameters. In order to attain the necessary number of reference points a numerical technique is employed that ensures their supplementing up to a regular array with the use of linear interpolation. The obtained dependences of the effective properties versus the control parameters are constructed in the form of surfaces and corresponding isolines. In doing so, a region with the required range of effective properties values is allocated at the isolines graphs. Then, the variety regions are overlapped, whereas their intersection determines the range of the control parameters that provides the effective characteristics to take the required values.

AB - New composites based on polyetheretherketone (PEEK) resin with specified physical-mechanical properties are developed with the use of experimental data on the dependence of effective properties (volumetric wear, modulus of elasticity, value of elongation at break, etc.) versus the values of control parameters. The loading (content) of short (milled) carbon fibers (200 μm) and PTFE particles (5-15 μm) are used as the control parameters. In order to attain the necessary number of reference points a numerical technique is employed that ensures their supplementing up to a regular array with the use of linear interpolation. The obtained dependences of the effective properties versus the control parameters are constructed in the form of surfaces and corresponding isolines. In doing so, a region with the required range of effective properties values is allocated at the isolines graphs. Then, the variety regions are overlapped, whereas their intersection determines the range of the control parameters that provides the effective characteristics to take the required values.

UR - http://www.scopus.com/inward/record.url?scp=85059031822&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059031822&partnerID=8YFLogxK

U2 - 10.1063/1.5083277

DO - 10.1063/1.5083277

M3 - Conference contribution

AN - SCOPUS:85059031822

VL - 2051

BT - Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures

A2 - Fomin, Vasily M.

A2 - Panin, Victor E.

A2 - Psakhie, Sergey G.

PB - American Institute of Physics Inc.

ER -