Experimental Study of Sliding Friction for PET Track Membranes

Результат исследований: Материалы для журналаСтатья

2 Цитирования (Scopus)

Аннотация

The article is presented results of a study of the process for a dry friction metal-polymer couple on scheme disc-finger. Track membrane from polyethylene terephthalate was a research material. Membrane had pores with 0.4 and 0.8 μm diameters. The effect of the sliding velocity for membranes with pores of 0.8 microns was determined. Research was shown that increasing pore's diameter caused a reduction of the friction coefficient and downturn its magnitude vibrations. The study showed that track membrane have adequate resistance to wear and can be successfully used in surgical procedures in the layers of the cornea.

Язык оригиналаАнглийский
Номер статьи012020
ЖурналIOP Conference Series: Materials Science and Engineering
Том125
Номер выпуска1
DOI
СостояниеОпубликовано - 5 мая 2016

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Подробные сведения о темах исследования «Experimental Study of Sliding Friction for PET Track Membranes». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать