Аннотация
The paper describes the experimental research of drilling mud influence on engineering parameters of mud motor mechanical rubber components. It is believed to be urgent due to increase in using mud motors in oil and gas well construction now, and, consequently, the issue of increasing their exploitation is becoming current. The development test results of elastomer IRP-1226 dependent on the mud type (alkaline, hydrocarbon or salt- saturated ones) and the temperature are shown in the paper. It is proved that the type of drilling mud and the temperature in bottom-hole zone have an influence on wear of mud motors elastomers.
Язык оригинала | Английский |
---|---|
Название основной публикации | IOP Conference Series: Earth and Environmental Science |
Издатель | Institute of Physics Publishing |
Том | 27 |
Издание | 1 |
DOI | |
Состояние | Опубликовано - 10 ноя 2015 |
Событие | 19th International Scientific Symposium on Problems of Geology and Subsurface Development, PGON 2014 - Tomsk, Российская Федерация Продолжительность: 6 апр 2015 → 10 апр 2015 |
Другое
Другое | 19th International Scientific Symposium on Problems of Geology and Subsurface Development, PGON 2014 |
---|---|
Страна | Российская Федерация |
Город | Tomsk |
Период | 6.4.15 → 10.4.15 |
ASJC Scopus subject areas
- Earth and Planetary Sciences(all)
- Environmental Science(all)