Expansion of the plasma corona from a wire exploded in vacuum

A. G. Rousskikh, V. I. Oreshkin, A. Zhigalin, I. I. Beilis, R. B. Baksht

Результат исследований: Материалы для журналаСтатья

26 Цитирования (Scopus)

Аннотация

An experiment was performed with the aim to determine the expansion velocity of the corona that is formed around a wire exploded in vacuum. The corona expansion velocity was found for Al and W wires as the wire current density was increased to 1× 108 -1.4× 108 A/cm2. It was estimated by the time at which current started flowing through auxiliary electrodes separated from the wire axis by a certain distance. The measurements were performed with preliminary heated and unheated wires. It has been demonstrated that for unheated wires the expansion velocity of the plasma corona is determined by the expansion velocity of the desorbed gas and approximately equals (7±0.5) × 106, (9±0.5) × 106, and (1.1±0.6) × 107 cm/s at a generator charge voltage of 10, 20, and 30 kV, respectively. For preliminary heated tungsten wires the metal vapor expansion velocity was (4.2±0.5) × 106, (7±0.5) × 106, and (9±0.6) × 106 cm/s at a charge voltage of 10, 20, and 30 kV, respectively.

Язык оригиналаАнглийский
Номер статьи033505
ЖурналPhysics of Plasmas
Том17
Номер выпуска3
DOI
СостояниеОпубликовано - 2010
Опубликовано для внешнего пользованияДа

ASJC Scopus subject areas

  • Condensed Matter Physics

Fingerprint Подробные сведения о темах исследования «Expansion of the plasma corona from a wire exploded in vacuum». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Rousskikh, A. G., Oreshkin, V. I., Zhigalin, A., Beilis, I. I., & Baksht, R. B. (2010). Expansion of the plasma corona from a wire exploded in vacuum. Physics of Plasmas, 17(3), [033505]. https://doi.org/10.1063/1.3325349