Environmental aspects of converting municipal solid waste into energy as part of composite fuels

Dmitrii Glushkov, Kristina Paushkina, Dmitrii Shabardin, Pavel Strizhak

Результат исследований: Материалы для журналаСтатья

10 Цитирования (Scopus)

Выдержка

The paper outlines the results of the experimental research into the ignition and combustion of composite liquid fuel with fine-grained particles of municipal solid wastes (MSW) added as a solid fuel component: wood, rubber, plastic, and cardboard. A relatively low concentration (about 10 wt%) of these components in the fuel intensifies the ignition process, given that all other conditions are the same. The experimental research has been performed using two experimental setups. The first setup allows for researching the conditions of radiant heating of motionless fuel droplets (about 1 mm in size) in a muffle furnace when the temperature is in the range of 400–1000 °C. The second setup allows for implementing the conditions of convective heating of motionless fuel droplets (about 1 mm in size) in the flow of pre-heated air (at the rate of 3 m/s and the temperature in the range of 400–700 °C). The research findings include minimum temperatures required for the stable ignition of composite liquid fuel with added MSW. They also include the dependencies of ignition delay times on the temperature under different heating conditions. It has also been determined that fuels with MSW are notable for lower nitrogen oxide and sulfur oxide concentrations in gaseous combustion products as compared to fuels without municipal wastes. Maximum difference in the concentrations of NOx and SOx for such fuels reaches 70% and 45% (in absolute units, 125 ppm and 50 ppm, respectively). The results of analytical calculations of relative fuel performance coefficients provide good reasons for the prospective use of such compositions in thermal power engineering. These relative coefficients took values in the range of 1–3. The results obtained provide ground for developing a disposal technology for MSW that cannot be processed or recycled. The technology must be power-efficient as well as economically efficient and environmentally friendly.

Язык оригиналаАнглийский
Страницы (с-по)1029-1042
Число страниц14
ЖурналJournal of Cleaner Production
Том201
DOI
СостояниеОпубликовано - 10 ноя 2018

Отпечаток

Municipal solid waste
municipal solid waste
Composite materials
Ignition
energy
Liquid fuels
heating
Radiant heating
droplet
Heating
Temperature
combustion
temperature
Energy
Nitrogen oxides
Waste disposal
liquid
thermal power
Time delay
Wood

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Environmental Science(all)
  • Strategy and Management
  • Industrial and Manufacturing Engineering

Цитировать

Environmental aspects of converting municipal solid waste into energy as part of composite fuels. / Glushkov, Dmitrii; Paushkina, Kristina; Shabardin, Dmitrii; Strizhak, Pavel.

В: Journal of Cleaner Production, Том 201, 10.11.2018, стр. 1029-1042.

Результат исследований: Материалы для журналаСтатья

@article{2b8ef08b0e8247f1aa3c6b6d1c1c5287,
title = "Environmental aspects of converting municipal solid waste into energy as part of composite fuels",
abstract = "The paper outlines the results of the experimental research into the ignition and combustion of composite liquid fuel with fine-grained particles of municipal solid wastes (MSW) added as a solid fuel component: wood, rubber, plastic, and cardboard. A relatively low concentration (about 10 wt{\%}) of these components in the fuel intensifies the ignition process, given that all other conditions are the same. The experimental research has been performed using two experimental setups. The first setup allows for researching the conditions of radiant heating of motionless fuel droplets (about 1 mm in size) in a muffle furnace when the temperature is in the range of 400–1000 °C. The second setup allows for implementing the conditions of convective heating of motionless fuel droplets (about 1 mm in size) in the flow of pre-heated air (at the rate of 3 m/s and the temperature in the range of 400–700 °C). The research findings include minimum temperatures required for the stable ignition of composite liquid fuel with added MSW. They also include the dependencies of ignition delay times on the temperature under different heating conditions. It has also been determined that fuels with MSW are notable for lower nitrogen oxide and sulfur oxide concentrations in gaseous combustion products as compared to fuels without municipal wastes. Maximum difference in the concentrations of NOx and SOx for such fuels reaches 70{\%} and 45{\%} (in absolute units, 125 ppm and 50 ppm, respectively). The results of analytical calculations of relative fuel performance coefficients provide good reasons for the prospective use of such compositions in thermal power engineering. These relative coefficients took values in the range of 1–3. The results obtained provide ground for developing a disposal technology for MSW that cannot be processed or recycled. The technology must be power-efficient as well as economically efficient and environmentally friendly.",
keywords = "Composite liquid fuel, Ignition and combustion, Municipal solid wastes, Power generation, Utilization",
author = "Dmitrii Glushkov and Kristina Paushkina and Dmitrii Shabardin and Pavel Strizhak",
year = "2018",
month = "11",
day = "10",
doi = "10.1016/j.jclepro.2018.08.126",
language = "English",
volume = "201",
pages = "1029--1042",
journal = "Journal of Cleaner Production",
issn = "0959-6526",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Environmental aspects of converting municipal solid waste into energy as part of composite fuels

AU - Glushkov, Dmitrii

AU - Paushkina, Kristina

AU - Shabardin, Dmitrii

AU - Strizhak, Pavel

PY - 2018/11/10

Y1 - 2018/11/10

N2 - The paper outlines the results of the experimental research into the ignition and combustion of composite liquid fuel with fine-grained particles of municipal solid wastes (MSW) added as a solid fuel component: wood, rubber, plastic, and cardboard. A relatively low concentration (about 10 wt%) of these components in the fuel intensifies the ignition process, given that all other conditions are the same. The experimental research has been performed using two experimental setups. The first setup allows for researching the conditions of radiant heating of motionless fuel droplets (about 1 mm in size) in a muffle furnace when the temperature is in the range of 400–1000 °C. The second setup allows for implementing the conditions of convective heating of motionless fuel droplets (about 1 mm in size) in the flow of pre-heated air (at the rate of 3 m/s and the temperature in the range of 400–700 °C). The research findings include minimum temperatures required for the stable ignition of composite liquid fuel with added MSW. They also include the dependencies of ignition delay times on the temperature under different heating conditions. It has also been determined that fuels with MSW are notable for lower nitrogen oxide and sulfur oxide concentrations in gaseous combustion products as compared to fuels without municipal wastes. Maximum difference in the concentrations of NOx and SOx for such fuels reaches 70% and 45% (in absolute units, 125 ppm and 50 ppm, respectively). The results of analytical calculations of relative fuel performance coefficients provide good reasons for the prospective use of such compositions in thermal power engineering. These relative coefficients took values in the range of 1–3. The results obtained provide ground for developing a disposal technology for MSW that cannot be processed or recycled. The technology must be power-efficient as well as economically efficient and environmentally friendly.

AB - The paper outlines the results of the experimental research into the ignition and combustion of composite liquid fuel with fine-grained particles of municipal solid wastes (MSW) added as a solid fuel component: wood, rubber, plastic, and cardboard. A relatively low concentration (about 10 wt%) of these components in the fuel intensifies the ignition process, given that all other conditions are the same. The experimental research has been performed using two experimental setups. The first setup allows for researching the conditions of radiant heating of motionless fuel droplets (about 1 mm in size) in a muffle furnace when the temperature is in the range of 400–1000 °C. The second setup allows for implementing the conditions of convective heating of motionless fuel droplets (about 1 mm in size) in the flow of pre-heated air (at the rate of 3 m/s and the temperature in the range of 400–700 °C). The research findings include minimum temperatures required for the stable ignition of composite liquid fuel with added MSW. They also include the dependencies of ignition delay times on the temperature under different heating conditions. It has also been determined that fuels with MSW are notable for lower nitrogen oxide and sulfur oxide concentrations in gaseous combustion products as compared to fuels without municipal wastes. Maximum difference in the concentrations of NOx and SOx for such fuels reaches 70% and 45% (in absolute units, 125 ppm and 50 ppm, respectively). The results of analytical calculations of relative fuel performance coefficients provide good reasons for the prospective use of such compositions in thermal power engineering. These relative coefficients took values in the range of 1–3. The results obtained provide ground for developing a disposal technology for MSW that cannot be processed or recycled. The technology must be power-efficient as well as economically efficient and environmentally friendly.

KW - Composite liquid fuel

KW - Ignition and combustion

KW - Municipal solid wastes

KW - Power generation

KW - Utilization

UR - http://www.scopus.com/inward/record.url?scp=85053084167&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053084167&partnerID=8YFLogxK

U2 - 10.1016/j.jclepro.2018.08.126

DO - 10.1016/j.jclepro.2018.08.126

M3 - Article

AN - SCOPUS:85053084167

VL - 201

SP - 1029

EP - 1042

JO - Journal of Cleaner Production

JF - Journal of Cleaner Production

SN - 0959-6526

ER -