Electroerosive production of coating material in a coaxial magnetoplasma accelerator

Результат исследования: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

Experimental research of accelerating channel electric erosion of a hybrid coaxial magneto plasma accelerator was carried out. The general rules of erosion distribution along the barrel were determined. It was calculated that the optimum barrel length is equal to the length of an external induction system solenoid, and up to 90% of eroded material mass located there is carried away by a hypervelocity stream. It is shown that the most important factor determining erosion is specific supplied energy (per volume unit of accelerating channel. Integral specific erosion me/W is directly proportional to the energy dissipated in the unit of barrel volume.

Язык оригиналаАнглийский
Заголовок главной публикацииProceedings - 9th Russian-Korean International Symposium on Science and Technology, KORUS-2005
Страницы389-392
Количество страниц4
Том1
DOI
Статус публикацииОпубликовано - 2005
Событие9th Russian-Korean International Symposium on Science and Technology, KORUS-2005 - Novosibirsk, Российская Федерация
Длительность: 26 июн 20052 июл 2005

Другое

Другое9th Russian-Korean International Symposium on Science and Technology, KORUS-2005
СтранаРоссийская Федерация
ГородNovosibirsk
Период26.6.052.7.05

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)

Цитировать

Sivkov, A. A., Gerasimov, D. Y., & Tsibina, A. S. (2005). Electroerosive production of coating material in a coaxial magnetoplasma accelerator. В Proceedings - 9th Russian-Korean International Symposium on Science and Technology, KORUS-2005 (Том 1, стр. 389-392). [1507739] https://doi.org/10.1109/KORUS.2005.1507739