Electric arc surfacing on low carbon steel: Structure and properties

Yury Fedorovich Ivanov, Victor Gromov, Vasilii Kormyshev, Sergey Konovalov, Evgenii Kapralov, Alexander Semin

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Выдержка

By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Подзаголовок основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
ИздательAmerican Institute of Physics Inc.
Том1783
ISBN (электронное издание)9780735414457
DOI
СостояниеОпубликовано - 10 ноя 2016
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Российская Федерация
Продолжительность: 19 сен 201623 сен 2016

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
СтранаРоссийская Федерация
ГородTomsk
Период19.9.1623.9.16

Отпечаток

steel structures
electric arcs
low carbon steels
borides
martensite
eutectics
materials science
microhardness
stress distribution
residual stress
extinction
wire
mechanical properties
coatings
iron
cross sections

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Ivanov, Y. F., Gromov, V., Kormyshev, V., Konovalov, S., Kapralov, E., & Semin, A. (2016). Electric arc surfacing on low carbon steel: Structure and properties. В Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 (Том 1783). [020077] American Institute of Physics Inc.. https://doi.org/10.1063/1.4966370

Electric arc surfacing on low carbon steel : Structure and properties. / Ivanov, Yury Fedorovich; Gromov, Victor; Kormyshev, Vasilii; Konovalov, Sergey; Kapralov, Evgenii; Semin, Alexander.

Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Том 1783 American Institute of Physics Inc., 2016. 020077.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Ivanov, YF, Gromov, V, Kormyshev, V, Konovalov, S, Kapralov, E & Semin, A 2016, Electric arc surfacing on low carbon steel: Structure and properties. в Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. том. 1783, 020077, American Institute of Physics Inc., International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016, Tomsk, Российская Федерация, 19.9.16. https://doi.org/10.1063/1.4966370
Ivanov YF, Gromov V, Kormyshev V, Konovalov S, Kapralov E, Semin A. Electric arc surfacing on low carbon steel: Structure and properties. В Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Том 1783. American Institute of Physics Inc. 2016. 020077 https://doi.org/10.1063/1.4966370
Ivanov, Yury Fedorovich ; Gromov, Victor ; Kormyshev, Vasilii ; Konovalov, Sergey ; Kapralov, Evgenii ; Semin, Alexander. / Electric arc surfacing on low carbon steel : Structure and properties. Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Том 1783 American Institute of Physics Inc., 2016.
@inproceedings{6d50356161a244f8bdf6ba460f095232,
title = "Electric arc surfacing on low carbon steel: Structure and properties",
abstract = "By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.",
author = "Ivanov, {Yury Fedorovich} and Victor Gromov and Vasilii Kormyshev and Sergey Konovalov and Evgenii Kapralov and Alexander Semin",
year = "2016",
month = "11",
day = "10",
doi = "10.1063/1.4966370",
language = "English",
volume = "1783",
booktitle = "Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Electric arc surfacing on low carbon steel

T2 - Structure and properties

AU - Ivanov, Yury Fedorovich

AU - Gromov, Victor

AU - Kormyshev, Vasilii

AU - Konovalov, Sergey

AU - Kapralov, Evgenii

AU - Semin, Alexander

PY - 2016/11/10

Y1 - 2016/11/10

N2 - By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.

AB - By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.

UR - http://www.scopus.com/inward/record.url?scp=85005980989&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85005980989&partnerID=8YFLogxK

U2 - 10.1063/1.4966370

DO - 10.1063/1.4966370

M3 - Conference contribution

AN - SCOPUS:85005980989

VL - 1783

BT - Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016

PB - American Institute of Physics Inc.

ER -