Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers

S. V. Konovalov, D. V. Zagulyaev, Y. F. Ivanov, V. E. Gromov

Результат исследований: Материалы для журналаСтатья

6 Цитирования (Scopus)

Аннотация

Microhardness, structure and phase state of silumin modified by coating with yttrium oxide when electroexplosive alloying were analyzed. Appropriate processing modes were estimated according to the results of research. The study on the structure and phase composition was carried out for the processing mode, which increases microhardness of the surface layer more than twice. A complex of research procedures was used to analyze the structure and phase composition. As revealed in the study, the coatings with a thickness of 50 – 80 μm are highly rough and porous, they have a sub-micro- and nano-scaled multiphase structure with particles of silicon, Y2O3, YSi2 and Y2Si2O7 as strengthening phases, and alloying elements (silicon, yttrium, and oxygen) don’t tend to spread homogenously in them.

Язык оригиналаАнглийский
Номер статьи201730
Страницы (с-по)253-256
Число страниц4
ЖурналMetalurgija
Том57
Номер выпуска4
СостояниеОпубликовано - 1 окт 2018

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Подробные сведения о темах исследования «Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Konovalov, S. V., Zagulyaev, D. V., Ivanov, Y. F., & Gromov, V. E. (2018). Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers. Metalurgija, 57(4), 253-256. [201730].