Effect of the heat flux density on the evaporation rate of a distilled water drop

Результат исследований: Материалы для журнала

10 Цитирования (Scopus)

Аннотация

This paper presents the experimental dependence of the evaporation rate of a nondeaerated distilled water drop from the heat flux density on the surfaces of non-ferrous metals (copper and brass). A drop was placed on a heated substrate by electronic dosing device. To obtain drop profile we use a shadow optical system; drop symmetry was controlled by a high-speed video camera. It was found that the evaporation rate of a drop on a copper substrate is greater than on a brass. The evaporation rate increases intensively with raising volume of a drop. Calculated values of the heat flux density and the corresponding evaporation rates are presented in this work. The evaporation rate is found to increase intensively on the brass substrate with raising the heat flux density.

Язык оригиналаАнглийский
Номер статьи01060
ЖурналEPJ Web of Conferences
Том110
DOI
СостояниеОпубликовано - 23 фев 2016
СобытиеThermophysical Basis of Energy Technologies 2015 - Tomsk, Российская Федерация
Продолжительность: 13 окт 201515 окт 2015

    Fingerprint

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать