Effect of substrate temperature on microstructure and properties of the CuCr25 alloys produced by electron beam cladding

V. Durakov, S. Gnyusov, A. Schneider, S. Popov, V. Lavrinovich, A. Batrakov, B. Dampilon

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Аннотация

The microstructure and properties of the contact CuCr alloy produced by electron-beam cladding have been investigated. The effect of the electron beam cladding parameters and preheating temperature of the base metal on the structure and the properties of the coatings has been determined. The bimodal structure of the cladding coating has been established. The short circuit currents tests are made on the Weil-Dobke synthetic circuit simulating operation of a VCB in real electric networks. Test results showed that the cladding contact material has better breakdown strength after current zero than the sintered contact material in mass production. Application of the technology of electron beam cladding in the production of contact material would significantly improve a specific characteristics and the reliability of vacuum switching equipment.

Язык оригиналаАнглийский
Название основной публикацииProceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV
ИздательInstitute of Electrical and Electronics Engineers Inc.
Страницы525-528
Число страниц4
ISBN (печатное издание)9781479967506
DOI
СостояниеОпубликовано - 18 ноя 2014
Событие26th International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV 2014 - Mumbai, Индия
Продолжительность: 28 сен 20143 окт 2014

Другое

Другое26th International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV 2014
СтранаИндия
ГородMumbai
Период28.9.143.10.14

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Software

Fingerprint Подробные сведения о темах исследования «Effect of substrate temperature on microstructure and properties of the CuCr25 alloys produced by electron beam cladding». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Durakov, V., Gnyusov, S., Schneider, A., Popov, S., Lavrinovich, V., Batrakov, A., & Dampilon, B. (2014). Effect of substrate temperature on microstructure and properties of the CuCr25 alloys produced by electron beam cladding. В Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV (стр. 525-528). [6961735] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/DEIV.2014.6961735