Effect of processing parameters on in situ screen printing-assisted synthesis and electrical properties of Ti3SiC2-based structures

Mylena Lorenz, Nahum Travitzky, Carlos R. Rambo

Результат исследований: Материалы для журналаСтатьярецензирование

Аннотация

This work reports on the development of pastes containing Ti, TiC, Si, and C elementary powders for in situ synthesis of Ti3SiC2 via screen printing. Four paste compositions were manufactured using two powder mixtures (Ti/Si/C and Ti/TiC/Si/C) with different stoichiometry. The pastes were screen printed onto Al2O3 substrates and sintered at 1400 ℃ in argon varying the dwell time from 1 to 5 h. The printed pastes containing TiC and excess of Si exhibited the lowest surface roughness and after 5 h sintering comprised of Ti3SiC2 as the majority phase. The electrical conductivity of this sample was found to range from 4.63×104 to 2.57×105 S·m–1 in a temperature range of 25–400 ℃.

Язык оригиналаАнглийский
Страницы (с-по)129-138
Число страниц10
ЖурналJournal of Advanced Ceramics
Том10
Номер выпуска1
DOI
СостояниеОпубликовано - фев 2021

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites

Fingerprint Подробные сведения о темах исследования «Effect of processing parameters on in situ screen printing-assisted synthesis and electrical properties of Ti<sub>3</sub>SiC<sub>2</sub>-based structures». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать