The article presents the results of a study of the effect of mechanical load on the temperature dependence of the initial permeability of LiTiZn soft ferrite ceramics. Regimes of mechanical load were created by a steel non-magnetic ring with screws. In this work, four levels of mechanical load were investigated: without load, with 1, 2 and 3 screws. For obtaining temperature dependences and exclude the influence of prehistory on the initial permeability, the samples were heated to a temperature exceeding the Curie point by 50 degrees, after which they slowly cooled to room temperature. The defects level was determined by the ratio of the parameters β / α of the phenomenological expression, which describes the experimental temperature dependences. It is shown that as the mechanical load increases, the defects level of ferrite ceramics increases, and after load removing, it returns to its original level.

Язык оригиналаАнглийский
Артикульный номер02010
ЖурналMATEC Web of Conferences
Статус публикацииОпубликовано - 6 авг 2018
Событие7th International Conference on Engineering Mathematics and Physics, ICEMP 2018 - Prague, Чешская Республика
Длительность: 15 июн 201818 июн 2018


ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Engineering(all)