Выдержка
The article presents results of studies on the effect of pre-lathed surface micro-relief on surface micro-hardness after ultrasonic plastic treatment, as well as the effect of ultrasonic treatment on structure and properties of surface layers of steels 20 and 40X. The effect of ultrasonic treatment processing modes on roughness and micro-hardness of the surface layers was studied. It is shown that roughness values as well as form of ridges and grooves, obtained by pre-lathing, effect the growth of micro-hardness values after ultrasonic plastic treatment.
| Язык оригинала | Английский |
|---|---|
| Номер статьи | 012033 |
| Журнал | IOP Conference Series: Materials Science and Engineering |
| Том | 125 |
| Номер выпуска | 1 |
| DOI | |
| Состояние | Опубликовано - 5 мая 2016 |
| Событие | All-Russia Scientific and Practical Conference on Materials Treatment: Current Problems and Solutions - Yurga, Российская Федерация Продолжительность: 26 ноя 2015 → 28 ноя 2015 |
Отпечаток
ASJC Scopus subject areas
- Materials Science(all)
- Engineering(all)
Цитировать
Effect of Initial Microtopography and Ultrasonic Treatment Mode on Steel Surface Layer Quality. / Zaitsev, K. V.; Lychagin, D. V.; Arkhipova, D. A.
В: IOP Conference Series: Materials Science and Engineering, Том 125, № 1, 012033, 05.05.2016.Результат исследований: Материалы для журнала
}
TY - JOUR
T1 - Effect of Initial Microtopography and Ultrasonic Treatment Mode on Steel Surface Layer Quality
AU - Zaitsev, K. V.
AU - Lychagin, D. V.
AU - Arkhipova, D. A.
PY - 2016/5/5
Y1 - 2016/5/5
N2 - The article presents results of studies on the effect of pre-lathed surface micro-relief on surface micro-hardness after ultrasonic plastic treatment, as well as the effect of ultrasonic treatment on structure and properties of surface layers of steels 20 and 40X. The effect of ultrasonic treatment processing modes on roughness and micro-hardness of the surface layers was studied. It is shown that roughness values as well as form of ridges and grooves, obtained by pre-lathing, effect the growth of micro-hardness values after ultrasonic plastic treatment.
AB - The article presents results of studies on the effect of pre-lathed surface micro-relief on surface micro-hardness after ultrasonic plastic treatment, as well as the effect of ultrasonic treatment on structure and properties of surface layers of steels 20 and 40X. The effect of ultrasonic treatment processing modes on roughness and micro-hardness of the surface layers was studied. It is shown that roughness values as well as form of ridges and grooves, obtained by pre-lathing, effect the growth of micro-hardness values after ultrasonic plastic treatment.
UR - http://www.scopus.com/inward/record.url?scp=84977667032&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84977667032&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/125/1/012033
DO - 10.1088/1757-899X/125/1/012033
M3 - Conference article
AN - SCOPUS:84977667032
VL - 125
JO - IOP Conference Series: Materials Science and Engineering
JF - IOP Conference Series: Materials Science and Engineering
SN - 1757-8981
IS - 1
M1 - 012033
ER -