Effect of friction on subsurface layer microstructure in austenitic and martensitic steels

S. Yu Tarassov, A. V. Kolubaev

Результат исследований: Материалы для журналаСтатья

32 Цитирования (Scopus)


By means of transmission and scanning electron microscopy, the microstructure of subsurface layer on specimens after friction tests has been examined. The load and sliding speed dependencies of the coefficient of friction and temperature have been obtained on specimens from austenitic and martensitic steels. It has been shown that severe adhesive wear (seizure) conditions result in formation of a 20- to 40-μm-thick layer with the fine-crystalline microstructure. The thickness of the layer does not seem to depend on either preceding heat treatment or initial state of the material.

Язык оригиналаАнглийский
Страницы (с-по)228-234
Число страниц7
Номер выпуска2
СостояниеОпубликовано - июл 1999
Опубликовано для внешнего пользованияДа


ASJC Scopus subject areas

  • Engineering(all)
  • Mechanical Engineering
  • Surfaces, Coatings and Films