Evolution of microstructure, elemental and phase composition of dense zirconia-based composite under irradiation with electron beam were investigated. Tetragonal zirconia-based composite reinforced by 5 wt% alumina nanofibers and 0.5 wt% single-walled carbon nanotubes was prepared by spark plasma sintering at a temperature of 1500?C. Irradiation of the composite was carried out with a low-energy pulsed electron beam of submillisecond duration in the following mode: beam energy density 15 J•cm-2; pulse duration 200 μs; pulse repetition rate 0.3 s-1; pulses quantity 10, 20, 30 and 40; residual gas pressure (argon) in the working camera 10-2 Pa. It has been established that electron beam treatment leads to the formation of modified multilayered surface, the thickness of which varies from 6 to 40 μm. Redistribution of Al atoms in the modified surface layer was detected. The phase evolution dependent on the quantity of irradiation pulses and manifested in the crystalline structure of material.
|Журнал||Journal of Physics: Conference Series|
|Состояние||Опубликовано - 28 ноя 2019|
|Событие||14th International Conference on Gas Discharge Plasmas and Their Applications, GDP 2019 - Tomsk, Российская Федерация|
Продолжительность: 15 сен 2019 → 21 сен 2019
ASJC Scopus subject areas
- Physics and Astronomy(all)