Effect of copper additives on mechanical and tribotechnical properties of sintered composites al-sn

N. M. Rusin, Alexander Leonidovich Skorentsev, Alexey Valerievich Gurskikh

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

3 Цитирования (Scopus)

Аннотация

The mechanical and tribotechnical properties of sintered composites Al-Sn with small copper additives were studied. The sintering of compacts of pure metal powders mixture conducted in the vacuum furnace. It was established that copper additions up to 2% (wt. ) lead to a significant increase in the strength and sharp decrease in a plasticity of Al-Sn composites. Because last, only Al-20Sn-1Cu alloy samples saved the integrity under the multiple equal channels angular pressing. The strength of treated samples significantly increased, but their compressive deformation did not exceed 0. 5%. The wear intensity of Al-Sn-Cu samples under the dry friction was higher in comparison with Al-Sn composites.

Язык оригиналаАнглийский
Название основной публикацииKey Engineering Materials
ИздательTrans Tech Publications Ltd
Страницы295-299
Число страниц5
Том685
ISBN (печатное издание)9783038357087
DOI
СостояниеОпубликовано - 2016
Событие4th International Conference for Young Scientists High Technology: Research and Applications, HTRA 2015 - Tomsk, Российская Федерация
Продолжительность: 21 апр 201524 апр 2015

Серия публикаций

НазваниеKey Engineering Materials
Том685
ISSN (печатное издание)10139826

Конференция

Конференция4th International Conference for Young Scientists High Technology: Research and Applications, HTRA 2015
СтранаРоссийская Федерация
ГородTomsk
Период21.4.1524.4.15

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Effect of copper additives on mechanical and tribotechnical properties of sintered composites al-sn». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать