Digital signal processing in pulse method for measuring frequency response function of high-current shunt

A. I. Zarevich, S. V. Muravyov, Elena Vyacheslavovna Bedareva

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Аннотация

In the paper a digital signal processing method for measuring frequency response function of highcurrent shunt are described. This is based on a joint digital processing of the input short pulse signal and a corresponding output. In order to measure the frequency response function, a short current pulse is applied to the shunt input; input and output signals of the shunt are recorded in a digital oscilloscope memory; then spectra of these two signals are computed. Amplitude and phase responses are determined by the arithmetic ratio of spectral components of the input and output signals at appropriate frequencies. For this purpose, an algorithm has been proposed and investigated.

Язык оригиналаАнглийский
Название основной публикации19th IMEKO TC4 Symposium - Measurements of Electrical Quantities 2013 and 17th International Workshop on ADC and DAC Modelling and Testing
Страницы496-500
Число страниц5
СостояниеОпубликовано - 2013
Событие19th IMEKO TC4 Symposium - Measurements of Electrical Quantities 2013 and 17th International Workshop on ADC and DAC Modelling and Testing - Barcelona, Испания
Продолжительность: 18 июл 201319 июл 2013

Другое

Другое19th IMEKO TC4 Symposium - Measurements of Electrical Quantities 2013 and 17th International Workshop on ADC and DAC Modelling and Testing
СтранаИспания
ГородBarcelona
Период18.7.1319.7.13

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Подробные сведения о темах исследования «Digital signal processing in pulse method for measuring frequency response function of high-current shunt». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Zarevich, A. I., Muravyov, S. V., & Bedareva, EV. (2013). Digital signal processing in pulse method for measuring frequency response function of high-current shunt. В 19th IMEKO TC4 Symposium - Measurements of Electrical Quantities 2013 and 17th International Workshop on ADC and DAC Modelling and Testing (стр. 496-500)