Development of impulse method for transformer winding condition control technology

A. Mytnikov, A. Lavrinovich, V. Strugov, M. Saqib

Результат исследований: Материалы для журналарецензирование

Аннотация

Mechanical shift of windings is serious problem of power transformers which belong to the very significant components of power engineering system. Mechanical displacements and following insulation failure due to short circuit and inrush currents can lead to an emergency situation. That's why the effective control technology of windings is an relevant task of a current power engineering. A new approach to winding state control technology is described in the paper. The described technology is based on nanosecond probing impulse duration with short (no more than 20 ns) rapidness of front impulse. The experimental results of sensitivity growth at decreasing front pulse duration are shown. The experimental equipment and research are described. It is established that duration of probing impulse has optimum value around 100ns. It is shown that it is possible to do a condition control under operating voltage. It is shown that both shorter probing impulse and front of probe pulse duration allows upgrading common effectiveness of the diagnostic technology.

Язык оригиналаАнглийский
Номер статьи012024
ЖурналIOP Conference Series: Materials Science and Engineering
Том1019
Номер выпуска1
DOI
СостояниеОпубликовано - 20 янв 2021
Событие14th International Forum on Strategic Technology, IFOST 2019 - Tomsk, Российская Федерация
Продолжительность: 14 окт 201917 окт 2019

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Development of impulse method for transformer winding condition control technology». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать