Design and testing of fluid resistor for repetitive high-voltage pulse generator

A. V. Poloskov, I. S. Egorov, M. A. Serebrennikov

Результат исследований: Материалы для журналаСтатьярецензирование

1 Цитирования (Scopus)


The paper presents a design and the results of testing of the liquid resistive load for a repetitive high-voltage generator (200 kV, 0.5 ms). The load uses a sealed dielectric case, which is to be placed into a vacuum volume (5×10-4 Torr) for electrical strength ensuring. Repetitive testing of the generator with the load (10 pps) caused the electrolyte heating, the load resistance decreasing, and the changing of a generator mode. An expansion tank is used to compensate thermal expansion of the electrolyte, which makes it possible to absorb up to 1 MJ of energy in the load without seals breaking. A generator load curve can be obtained for one experiment with a help of the fluid load without any additional depressurization of the vacuum volume.

Язык оригиналаАнглийский
Номер статьи012047
ЖурналJournal of Physics: Conference Series
Номер выпуска1
СостояниеОпубликовано - 4 мая 2017
Событие5th International Congress on Energy Fluxes and Radiation Effects 2016, EFRE 2016 - Tomsk, Российская Федерация
Продолжительность: 2 окт 20167 окт 2016

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Design and testing of fluid resistor for repetitive high-voltage pulse generator». Вместе они формируют уникальный семантический отпечаток (fingerprint).