Cyclic hardening and substructure of AlMg alloys

N. M. Grinberg, V. A. Serdyuk, A. M. Gavrilyako, D. V. Lychagin, E. V. Kozlov

    Результат исследований: Материалы для журналаСтатья

    6 Цитирования (Scopus)

    Выдержка

    The dislocation substructure and macroscopic regularities of cyclic hardening of aluminium alloy AMg6 are studied in the low and high cycle fatigue regions. The density of dislocations and dislocation loops as well as the microhardnesses of the surface and the near-surface layer are measured as functions of the strain amplitude, the number of cycles, the environment and the temperature. It is found that, as the number of cycles increases, the quantitative evolution of the initial dislocation substructure occurs mainly in the near-surface layer and the cyclic hardening develops in two (the high amplitude region) or three (the low amplitude region) stages. The importance of each structural component is estimated in relation to hardening in these regions. On the basis of our results and reports (on alloys with lower contents of magnesium) in the literature the effects of the stacking fault energy upon the substructures due to cyclic hardening of AlMg alloys are analysed in a wide range of magnesium contents (0-6.5 at.%) together with the difference between the substructures of these alloys and those of pure f.c.c. metals under similar conditions.

    Язык оригиналаАнглийский
    Страницы (с-по)49-61
    Число страниц13
    ЖурналMaterials Science and Engineering A
    Том138
    Номер выпуска1
    DOI
    СостояниеОпубликовано - 30 мая 1991

    Отпечаток

    substructures
    hardening
    Hardening
    Magnesium
    cycles
    magnesium
    surface layers
    stacking fault energy
    Stacking faults
    regularity
    aluminum alloys
    Microhardness
    microhardness
    Aluminum alloys
    Metals
    Fatigue of materials
    metals
    Temperature
    temperature

    ASJC Scopus subject areas

    • Materials Science(all)

    Цитировать

    Grinberg, N. M., Serdyuk, V. A., Gavrilyako, A. M., Lychagin, D. V., & Kozlov, E. V. (1991). Cyclic hardening and substructure of AlMg alloys. Materials Science and Engineering A, 138(1), 49-61. https://doi.org/10.1016/0921-5093(91)90675-D

    Cyclic hardening and substructure of AlMg alloys. / Grinberg, N. M.; Serdyuk, V. A.; Gavrilyako, A. M.; Lychagin, D. V.; Kozlov, E. V.

    В: Materials Science and Engineering A, Том 138, № 1, 30.05.1991, стр. 49-61.

    Результат исследований: Материалы для журналаСтатья

    Grinberg, NM, Serdyuk, VA, Gavrilyako, AM, Lychagin, DV & Kozlov, EV 1991, 'Cyclic hardening and substructure of AlMg alloys', Materials Science and Engineering A, том. 138, № 1, стр. 49-61. https://doi.org/10.1016/0921-5093(91)90675-D
    Grinberg NM, Serdyuk VA, Gavrilyako AM, Lychagin DV, Kozlov EV. Cyclic hardening and substructure of AlMg alloys. Materials Science and Engineering A. 1991 Май 30;138(1):49-61. https://doi.org/10.1016/0921-5093(91)90675-D
    Grinberg, N. M. ; Serdyuk, V. A. ; Gavrilyako, A. M. ; Lychagin, D. V. ; Kozlov, E. V. / Cyclic hardening and substructure of AlMg alloys. В: Materials Science and Engineering A. 1991 ; Том 138, № 1. стр. 49-61.
    @article{18db4a8e57294e9e804f0e0cb8e931c9,
    title = "Cyclic hardening and substructure of AlMg alloys",
    abstract = "The dislocation substructure and macroscopic regularities of cyclic hardening of aluminium alloy AMg6 are studied in the low and high cycle fatigue regions. The density of dislocations and dislocation loops as well as the microhardnesses of the surface and the near-surface layer are measured as functions of the strain amplitude, the number of cycles, the environment and the temperature. It is found that, as the number of cycles increases, the quantitative evolution of the initial dislocation substructure occurs mainly in the near-surface layer and the cyclic hardening develops in two (the high amplitude region) or three (the low amplitude region) stages. The importance of each structural component is estimated in relation to hardening in these regions. On the basis of our results and reports (on alloys with lower contents of magnesium) in the literature the effects of the stacking fault energy upon the substructures due to cyclic hardening of AlMg alloys are analysed in a wide range of magnesium contents (0-6.5 at.{\%}) together with the difference between the substructures of these alloys and those of pure f.c.c. metals under similar conditions.",
    author = "Grinberg, {N. M.} and Serdyuk, {V. A.} and Gavrilyako, {A. M.} and Lychagin, {D. V.} and Kozlov, {E. V.}",
    year = "1991",
    month = "5",
    day = "30",
    doi = "10.1016/0921-5093(91)90675-D",
    language = "English",
    volume = "138",
    pages = "49--61",
    journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",
    issn = "0921-5093",
    publisher = "Elsevier BV",
    number = "1",

    }

    TY - JOUR

    T1 - Cyclic hardening and substructure of AlMg alloys

    AU - Grinberg, N. M.

    AU - Serdyuk, V. A.

    AU - Gavrilyako, A. M.

    AU - Lychagin, D. V.

    AU - Kozlov, E. V.

    PY - 1991/5/30

    Y1 - 1991/5/30

    N2 - The dislocation substructure and macroscopic regularities of cyclic hardening of aluminium alloy AMg6 are studied in the low and high cycle fatigue regions. The density of dislocations and dislocation loops as well as the microhardnesses of the surface and the near-surface layer are measured as functions of the strain amplitude, the number of cycles, the environment and the temperature. It is found that, as the number of cycles increases, the quantitative evolution of the initial dislocation substructure occurs mainly in the near-surface layer and the cyclic hardening develops in two (the high amplitude region) or three (the low amplitude region) stages. The importance of each structural component is estimated in relation to hardening in these regions. On the basis of our results and reports (on alloys with lower contents of magnesium) in the literature the effects of the stacking fault energy upon the substructures due to cyclic hardening of AlMg alloys are analysed in a wide range of magnesium contents (0-6.5 at.%) together with the difference between the substructures of these alloys and those of pure f.c.c. metals under similar conditions.

    AB - The dislocation substructure and macroscopic regularities of cyclic hardening of aluminium alloy AMg6 are studied in the low and high cycle fatigue regions. The density of dislocations and dislocation loops as well as the microhardnesses of the surface and the near-surface layer are measured as functions of the strain amplitude, the number of cycles, the environment and the temperature. It is found that, as the number of cycles increases, the quantitative evolution of the initial dislocation substructure occurs mainly in the near-surface layer and the cyclic hardening develops in two (the high amplitude region) or three (the low amplitude region) stages. The importance of each structural component is estimated in relation to hardening in these regions. On the basis of our results and reports (on alloys with lower contents of magnesium) in the literature the effects of the stacking fault energy upon the substructures due to cyclic hardening of AlMg alloys are analysed in a wide range of magnesium contents (0-6.5 at.%) together with the difference between the substructures of these alloys and those of pure f.c.c. metals under similar conditions.

    UR - http://www.scopus.com/inward/record.url?scp=0026152744&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0026152744&partnerID=8YFLogxK

    U2 - 10.1016/0921-5093(91)90675-D

    DO - 10.1016/0921-5093(91)90675-D

    M3 - Article

    AN - SCOPUS:0026152744

    VL - 138

    SP - 49

    EP - 61

    JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

    JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

    SN - 0921-5093

    IS - 1

    ER -