Cross section of the cut layer in oblique single-edge boring by a radial cutter

A. V. Filippov, N. N. Shamarin, O. A. Podgornykh, P. A. Chazov

Результат исследований: Материалы для журналаСтатьярецензирование

8 Цитирования (Scopus)

Аннотация

In order to understand the shaping that results from a particular machining technique, the cross section of the cut layer must be determined. A method is proposed for calculating the parameters of the cutlayer cross section in oblique single-edge boring by a radial cutter. Formulas for the thickness and width of the cut layer are based on the main cutting parameters: the supply, the cutting depth, the diameter of the insert, and the diameter of the hole produced. The proposed calculations may be used in the design of the cutting tool and the machining process.

Язык оригиналаАнглийский
Страницы (с-по)367-371
Число страниц5
ЖурналRussian Engineering Research
Том37
Номер выпуска4
DOI
СостояниеОпубликовано - 1 апр 2017

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Подробные сведения о темах исследования «Cross section of the cut layer in oblique single-edge boring by a radial cutter». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать