Corrosion behaviour of high pressure die- cast and semisolid cast AZ91, AM60 and AM50 alloys

Simone Umberto Mariani, Anna Da Forno, Massimiliano Bestetti

Результат исследования: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Аннотация

A comparison of corrosion resistance of die-cast and semi-solid cast AZ91, AM60 and AM50 magnesium alloys was performed in different corrosive media by measurement of the open circuit potential, potentiodynamic scans and weight loss tests. Before testing, a heat treatment was carried out onto semi-solid cast alloys. Electrochemical measurements have shown that the semisolid cast alloys have a different corrosion rate compared to the die-cast ones. The results could be correlated to the different microstructures of the samples produced by the different processes.

Язык оригиналаАнглийский
Заголовок главной публикацииSemi-Solid Processing of Alloys and Composites XII
Страницы231-237
Количество страниц7
Том192-193
DOI
Статус публикацииОпубликовано - 2013
Опубликовано для внешнего пользованияДа
Событие12th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2012 - Cape Town, Южная Африка
Длительность: 8 окт 201211 окт 2012

Серии публикаций

Имя, фамилияSolid State Phenomena
Том192-193
ISSN (печатная версия)1012-0394

Конференция

Конференция12th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2012
СтранаЮжная Африка
ГородCape Town
Период8.10.1211.10.12

    Fingerprint

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Materials Science(all)
  • Condensed Matter Physics

Цитировать

Mariani, S. U., Da Forno, A., & Bestetti, M. (2013). Corrosion behaviour of high pressure die- cast and semisolid cast AZ91, AM60 and AM50 alloys. В Semi-Solid Processing of Alloys and Composites XII (Том 192-193, стр. 231-237). (Solid State Phenomena; Том 192-193). https://doi.org/10.4028/www.scientific.net/SSP.192-193.231