Corrosion behavior of Ti and Ti based alloys used as implants-supported mandibular overdentures

D. Meghea, M. Miculescu, C. M. Cotruţ, M. Bane, A. Gherghilescu, D. M. Vrânceanu

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

In the present study, four different types of the commercial dental implants used as support for total/partial dental prosthesis have been investigated. Pure Ti and Ti6Al4V alloy, provided by four different manufactures, were chosen because are the most frequently used in the dentistry market. The corrosion resistance was evaluated by using linear polarization technique, after recording the open circuit curves in Fusayama Meyer artificial saliva for 240 minutes. The corrosion tests in artificial saliva with pH 5.2 have shown that pure Ti exhibited a better behavior than the Ti alloy. This result can be explained by a higher stability of the passive thin layer of titanium oxide than the complex oxide layer formed on the Ti alloy surface.

Язык оригиналаАнглийский
Название основной публикацииBiomMedD 2014
РедакторыAntoniac Iulian, Miculescu Marian, Sinescu Cosmin, Albu Madalina
ИздательTrans Tech Publications Ltd
Страницы31-37
Число страниц7
ISBN (электронное издание)9783038354321
DOI
СостояниеОпубликовано - 1 янв 2014
Опубликовано для внешнего пользованияДа
Событие6th International Conference on Biomaterials, Tissue Engineering and Medical Devices, BiomMedD 2014 - Constanta, Румыния
Продолжительность: 17 сен 201420 сен 2014

Серия публикаций

НазваниеKey Engineering Materials
Том638
ISSN (печатное издание)1013-9826

Конференция

Конференция6th International Conference on Biomaterials, Tissue Engineering and Medical Devices, BiomMedD 2014
СтранаРумыния
ГородConstanta
Период17.9.1420.9.14

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Corrosion behavior of Ti and Ti based alloys used as implants-supported mandibular overdentures». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Meghea, D., Miculescu, M., Cotruţ, C. M., Bane, M., Gherghilescu, A., & Vrânceanu, D. M. (2014). Corrosion behavior of Ti and Ti based alloys used as implants-supported mandibular overdentures. В A. Iulian, M. Marian, S. Cosmin, & A. Madalina (Ред.), BiomMedD 2014 (стр. 31-37). (Key Engineering Materials; Том 638). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.638.31