Выдержка

A high-current self-breakdown gas switch stabilized by corona preionization was developed for closing of 300 kV repetitively operated at 10 pps water insulated double-forming line (Blumlein) of a nanosecond electron accelerator. The switch is installed at the end of the Blumlein and is used for closing of outer of two coaxial lines. High stability of the self-breakdown voltage (within ±1%) at fast charging of Blumlein (during ≈1.4 μs) is achieved by gas preionization in the spark-gap by additional pulsed corona discharge. The spark-gap electrode system includes two main toroidal electrodes and an additional corona needle that is located in the cavity of one of them (negative during the operation). It combines two parallel gas discharge gaps - the main spark gap and an additional corona discharge gap. Separating the functions of the spark and corona gaps makes it possible to optimize the geometry of the electrodes of each gap and provide both the ability to switch high currents and high dynamic characteristics for a long operating time. Dried air is used as a working gas at pressure of 3-4 atm (abs.). Gas blowing system includes 4 gas inlets located at outer flange supporting the high voltage insulator (water-gas interface) and one outlet in the cavity of the grounded main electrode. This scheme of gas flow protects the insulator from deposition of electrode erosion products and minimizes gas flow (≈20 l/min) for stable operation of the switch by removing of the hot gas throw the cavity of the grounded electrode.The design of the switch together with the main results of the working tests will be presented and discussed.

Язык оригиналаАнглийский
Номер статьи022018
ЖурналJournal of Physics: Conference Series
Том1115
Номер выпуска2
DOI
СостояниеОпубликовано - 27 ноя 2018
Событие6th International Congress on Energy Fluxes and Radiation Effects 2018, EFRE 2018 - Tomsk, Российская Федерация
Продолжительность: 16 сен 201822 сен 2018

Отпечаток

spark gaps
coronas
switches
electrodes
electric potential
gases
electric corona
closing
cavities
gas flow
high current
insulators
flanges
electron accelerators
blowing
gas discharges
high temperature gases
outlets
electrical faults
needles

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Corona-stabilized gas spark gap switch for a double forming line with 300 kV working voltage. / Krastelev, E. G.; Nashilevskiy, A. V.; Ponomarev, D. V.; Remnev, G. E.; Sedin, A. A.

В: Journal of Physics: Conference Series, Том 1115, № 2, 022018, 27.11.2018.

Результат исследований: Материалы для журнала

@article{ce88d28a0b47425e9a14c5912e7095ac,
title = "Corona-stabilized gas spark gap switch for a double forming line with 300 kV working voltage",
abstract = "A high-current self-breakdown gas switch stabilized by corona preionization was developed for closing of 300 kV repetitively operated at 10 pps water insulated double-forming line (Blumlein) of a nanosecond electron accelerator. The switch is installed at the end of the Blumlein and is used for closing of outer of two coaxial lines. High stability of the self-breakdown voltage (within ±1{\%}) at fast charging of Blumlein (during ≈1.4 μs) is achieved by gas preionization in the spark-gap by additional pulsed corona discharge. The spark-gap electrode system includes two main toroidal electrodes and an additional corona needle that is located in the cavity of one of them (negative during the operation). It combines two parallel gas discharge gaps - the main spark gap and an additional corona discharge gap. Separating the functions of the spark and corona gaps makes it possible to optimize the geometry of the electrodes of each gap and provide both the ability to switch high currents and high dynamic characteristics for a long operating time. Dried air is used as a working gas at pressure of 3-4 atm (abs.). Gas blowing system includes 4 gas inlets located at outer flange supporting the high voltage insulator (water-gas interface) and one outlet in the cavity of the grounded main electrode. This scheme of gas flow protects the insulator from deposition of electrode erosion products and minimizes gas flow (≈20 l/min) for stable operation of the switch by removing of the hot gas throw the cavity of the grounded electrode.The design of the switch together with the main results of the working tests will be presented and discussed.",
author = "Krastelev, {E. G.} and Nashilevskiy, {A. V.} and Ponomarev, {D. V.} and Remnev, {G. E.} and Sedin, {A. A.}",
year = "2018",
month = "11",
day = "27",
doi = "10.1088/1742-6596/1115/2/022018",
language = "English",
volume = "1115",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "2",

}

TY - JOUR

T1 - Corona-stabilized gas spark gap switch for a double forming line with 300 kV working voltage

AU - Krastelev, E. G.

AU - Nashilevskiy, A. V.

AU - Ponomarev, D. V.

AU - Remnev, G. E.

AU - Sedin, A. A.

PY - 2018/11/27

Y1 - 2018/11/27

N2 - A high-current self-breakdown gas switch stabilized by corona preionization was developed for closing of 300 kV repetitively operated at 10 pps water insulated double-forming line (Blumlein) of a nanosecond electron accelerator. The switch is installed at the end of the Blumlein and is used for closing of outer of two coaxial lines. High stability of the self-breakdown voltage (within ±1%) at fast charging of Blumlein (during ≈1.4 μs) is achieved by gas preionization in the spark-gap by additional pulsed corona discharge. The spark-gap electrode system includes two main toroidal electrodes and an additional corona needle that is located in the cavity of one of them (negative during the operation). It combines two parallel gas discharge gaps - the main spark gap and an additional corona discharge gap. Separating the functions of the spark and corona gaps makes it possible to optimize the geometry of the electrodes of each gap and provide both the ability to switch high currents and high dynamic characteristics for a long operating time. Dried air is used as a working gas at pressure of 3-4 atm (abs.). Gas blowing system includes 4 gas inlets located at outer flange supporting the high voltage insulator (water-gas interface) and one outlet in the cavity of the grounded main electrode. This scheme of gas flow protects the insulator from deposition of electrode erosion products and minimizes gas flow (≈20 l/min) for stable operation of the switch by removing of the hot gas throw the cavity of the grounded electrode.The design of the switch together with the main results of the working tests will be presented and discussed.

AB - A high-current self-breakdown gas switch stabilized by corona preionization was developed for closing of 300 kV repetitively operated at 10 pps water insulated double-forming line (Blumlein) of a nanosecond electron accelerator. The switch is installed at the end of the Blumlein and is used for closing of outer of two coaxial lines. High stability of the self-breakdown voltage (within ±1%) at fast charging of Blumlein (during ≈1.4 μs) is achieved by gas preionization in the spark-gap by additional pulsed corona discharge. The spark-gap electrode system includes two main toroidal electrodes and an additional corona needle that is located in the cavity of one of them (negative during the operation). It combines two parallel gas discharge gaps - the main spark gap and an additional corona discharge gap. Separating the functions of the spark and corona gaps makes it possible to optimize the geometry of the electrodes of each gap and provide both the ability to switch high currents and high dynamic characteristics for a long operating time. Dried air is used as a working gas at pressure of 3-4 atm (abs.). Gas blowing system includes 4 gas inlets located at outer flange supporting the high voltage insulator (water-gas interface) and one outlet in the cavity of the grounded main electrode. This scheme of gas flow protects the insulator from deposition of electrode erosion products and minimizes gas flow (≈20 l/min) for stable operation of the switch by removing of the hot gas throw the cavity of the grounded electrode.The design of the switch together with the main results of the working tests will be presented and discussed.

UR - http://www.scopus.com/inward/record.url?scp=85058277336&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85058277336&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/1115/2/022018

DO - 10.1088/1742-6596/1115/2/022018

M3 - Conference article

AN - SCOPUS:85058277336

VL - 1115

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 2

M1 - 022018

ER -