Converter circuit 〈voltage-voltage〉 investigation for power calibrator

Yu M. Fomichev, S. V. Silushkin, T. S. Mylnikova

Результат исследований: Материалы для журналаСтатья

Выдержка

The paper presents possible circuits to construct a voltage-voltage converter for the calibrator of fictitious power. The problems of circuit solutions were experimentally identified, and the ways of their elimination were found. One of the main problems of convectors is to provide small harmonic distortions and additional phase shift. The use of deep negative instantaneous value feedback helps to provide the desired level of nonlinear distortions and to reduce the phase shift. Corrective circuits are used to ensure the stability of the transducer at greater depths of the feedback; the half-period average value or rms value feedback is used to ensure the stability and accuracy of conversion. However, the accuracy of the power calibrator can be upgraded and its work for various types of loads can be ensured by means of application follower circuit with modern electronic components which are also discussed in the paper.

Язык оригиналаАнглийский
Номер статьи012039
ЖурналJournal of Physics: Conference Series
Том671
Номер выпуска1
DOI
СостояниеОпубликовано - 18 янв 2016

Отпечаток

converters
electric potential
phase shift
elimination
transducers
harmonics
electronics

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Converter circuit 〈voltage-voltage〉 investigation for power calibrator. / Fomichev, Yu M.; Silushkin, S. V.; Mylnikova, T. S.

В: Journal of Physics: Conference Series, Том 671, № 1, 012039, 18.01.2016.

Результат исследований: Материалы для журналаСтатья

@article{f14fe9eac7af470198b94424ef6aac0a,
title = "Converter circuit 〈voltage-voltage〉 investigation for power calibrator",
abstract = "The paper presents possible circuits to construct a voltage-voltage converter for the calibrator of fictitious power. The problems of circuit solutions were experimentally identified, and the ways of their elimination were found. One of the main problems of convectors is to provide small harmonic distortions and additional phase shift. The use of deep negative instantaneous value feedback helps to provide the desired level of nonlinear distortions and to reduce the phase shift. Corrective circuits are used to ensure the stability of the transducer at greater depths of the feedback; the half-period average value or rms value feedback is used to ensure the stability and accuracy of conversion. However, the accuracy of the power calibrator can be upgraded and its work for various types of loads can be ensured by means of application follower circuit with modern electronic components which are also discussed in the paper.",
author = "Fomichev, {Yu M.} and Silushkin, {S. V.} and Mylnikova, {T. S.}",
year = "2016",
month = "1",
day = "18",
doi = "10.1088/1742-6596/671/1/012039",
language = "English",
volume = "671",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Converter circuit 〈voltage-voltage〉 investigation for power calibrator

AU - Fomichev, Yu M.

AU - Silushkin, S. V.

AU - Mylnikova, T. S.

PY - 2016/1/18

Y1 - 2016/1/18

N2 - The paper presents possible circuits to construct a voltage-voltage converter for the calibrator of fictitious power. The problems of circuit solutions were experimentally identified, and the ways of their elimination were found. One of the main problems of convectors is to provide small harmonic distortions and additional phase shift. The use of deep negative instantaneous value feedback helps to provide the desired level of nonlinear distortions and to reduce the phase shift. Corrective circuits are used to ensure the stability of the transducer at greater depths of the feedback; the half-period average value or rms value feedback is used to ensure the stability and accuracy of conversion. However, the accuracy of the power calibrator can be upgraded and its work for various types of loads can be ensured by means of application follower circuit with modern electronic components which are also discussed in the paper.

AB - The paper presents possible circuits to construct a voltage-voltage converter for the calibrator of fictitious power. The problems of circuit solutions were experimentally identified, and the ways of their elimination were found. One of the main problems of convectors is to provide small harmonic distortions and additional phase shift. The use of deep negative instantaneous value feedback helps to provide the desired level of nonlinear distortions and to reduce the phase shift. Corrective circuits are used to ensure the stability of the transducer at greater depths of the feedback; the half-period average value or rms value feedback is used to ensure the stability and accuracy of conversion. However, the accuracy of the power calibrator can be upgraded and its work for various types of loads can be ensured by means of application follower circuit with modern electronic components which are also discussed in the paper.

UR - http://www.scopus.com/inward/record.url?scp=84960154496&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960154496&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/671/1/012039

DO - 10.1088/1742-6596/671/1/012039

M3 - Article

AN - SCOPUS:84960154496

VL - 671

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 012039

ER -