Controlling the type and the form of chip when machining steel

S. V. Gruby, A. A. Lasukov, R. Yu Nekrasov, E. V. Politsinsky, D. A. Arkhipova

Результат исследований: Материалы для журнала

2 Цитирования (Scopus)

Аннотация

The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.

Язык оригиналаАнглийский
Номер статьи012065
ЖурналIOP Conference Series: Materials Science and Engineering
Том142
Номер выпуска1
DOI
СостояниеОпубликовано - 2 сен 2016
Событие7th International Scientific Practical Conference on Innovative Technologies in Engineering - Yurga, Российская Федерация
Продолжительность: 19 мая 201621 мая 2016

    Fingerprint

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Цитировать