Control of the properties of molding compounds based on technical alumina

V. Yu Prokof'ev, A. P. Il'in

Результат исследований: Материалы для журналаСтатья

3 Цитирования (Scopus)

Аннотация

The effect of the paraffin content and the mode of its adding (after grinding and upon common grinding) into a molding compound prepared from technical alumina and 20% nitric acid was studied. It is established that the mechanochemical activation in the presence of paraffin allows one to control structural-mechanical and rheological properties of the material more efficiently. The sources of changing properties of the molding compounds are discussed.

Язык оригиналаАнглийский
Страницы (с-по)16-19
Число страниц4
ЖурналSteklo i Keramika
Номер выпуска3
СостояниеОпубликовано - 2004

ASJC Scopus subject areas

  • Ceramics and Composites

Fingerprint Подробные сведения о темах исследования «Control of the properties of molding compounds based on technical alumina». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать