Content optimization of polyphenylene sulfide composites filled with carbon fibers of different size

N. Yu Grishaeva, S. A. Bochkareva, S. V. Panin, Le Thi My Hiep, B. A. Lyukshin, I. L. Panov, Nguen Duc Ahn

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The chemical content of polyphenylene sulfide (PPS) based composite with specified physical-mechanical properties is determined in the study with the use of experimental data on the dependence of effective properties (volumetric wear, elastic modulus, elongation at break, etc.) versus the values of control parameters. The latter are degree of filling with (i) Short Carbon Fibers (SCF) of ∼70 μm long and (ii) Chopped Carbon Fibers (CCF) ∼2 mm long. After the required number of experimental reference points has been determined the technique for data supplementation up to a regular numerical array with the use of linear interpolation is employed. The obtained dependences of the effective properties versus the control parameter values are constructed in the form of surfaces and corresponding isolines. At the contour plots, a region with the required effective properties is then highlighted. Since the regions overlap each other, their intersection determines the allowable control parameters range that impart the required values to the effective properties. The possibility to design filled polymer materials with a complex of predefined strain-strength and tribological properties is demonstrated. The experimental results are used to gain the reference points in contrast to the previously used approach when a set of computational experiment data were employed. On the one hand, the combination of a full-scale laboratory and computational experiments makes the process of modeling and design materials more evident, clear and reasonable from a physical point of view. On the other hand, it allows to interpret the results as more reliable, as well as less time and material consuming.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
РедакторыVictor E. Panin, Sergey G. Psakhie, Vasily M. Fomin
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735419124
DOI
СостояниеОпубликовано - 19 ноя 2019
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20195 окт 2019

Серия публикаций

НазваниеAIP Conference Proceedings
Том2167
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
СтранаРоссийская Федерация
ГородTomsk
Период1.10.195.10.19

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Content optimization of polyphenylene sulfide composites filled with carbon fibers of different size». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Grishaeva, N. Y., Bochkareva, S. A., Panin, S. V., Hiep, L. T. M., Lyukshin, B. A., Panov, I. L., & Ahn, N. D. (2019). Content optimization of polyphenylene sulfide composites filled with carbon fibers of different size. В V. E. Panin, S. G. Psakhie, & V. M. Fomin (Ред.), Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 [020121] (AIP Conference Proceedings; Том 2167). American Institute of Physics Inc.. https://doi.org/10.1063/1.5131988