Аннотация

The design of a high voltage pulsed generator with an output voltage of 350 kV is described. The generator operates in the nanosecond range of pulse duration (300 ns) at a repetition rate of up to 10 pulses/s in a continuous mode and is intended for electric discharge technologies, specifically for removing of the concrete surface. The energy stored in the generator is 600 J, and the energy released in a pulse is 300 J. Requirement of concrete surface scraping with high voltage power generator, the advantages of applying the high voltage pulse power generator and the results of the concrete surface scraping are represented.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the 2012 IEEE International Power Modulator and High Voltage Conference, IPMHVC 2012
Страницы536-539
Число страниц4
DOI
СостояниеОпубликовано - 2012
Событие2012 IEEE International Power Modulator and High Voltage Conference, IPMHVC 2012 - San Diego, CA, Соединенные Штаты Америки
Продолжительность: 3 июн 20127 июн 2012

Другое

Другое2012 IEEE International Power Modulator and High Voltage Conference, IPMHVC 2012
СтранаСоединенные Штаты Америки
ГородSan Diego, CA
Период3.6.127.6.12

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint Подробные сведения о темах исследования «Concrete surface scraping with high voltage pulsed power generator EG-350». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать