Ceramics based on titanium nitride and silicon nitride sintered by SPS-method

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

4 Цитирования (Scopus)

Аннотация

The dependences of the microstructure and physical and mechanical properties of ceramic mixtures Si3N4/TiN in the full range of mass ratios of the components. Was also investigated directly, and the process of sintering occurring during a physical or chemical processes, in particular, has been obtained and the hardness of the material density on the ratio of the conductive titanium nitride phase and a silicon nitride insulating phase with values above and below the percolation threshold. Also obtained was pure ceramics based on titanium nitride with high physical-mechanical characteristics (H = 21.5 GPa).

Язык оригиналаАнглийский
Название основной публикацииIOP Conference Series: Materials Science and Engineering
ИздательInstitute of Physics Publishing
Том93
Издание1
DOI
СостояниеОпубликовано - 13 окт 2015
Событие21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015 - Tomsk, Российская Федерация
Продолжительность: 5 окт 20159 окт 2015

Другое

Другое21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015
СтранаРоссийская Федерация
ГородTomsk
Период5.10.159.10.15

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Цитировать

Sivkov, A. A., Gerasimov, D. Y., & Evdokimov, A. A. (2015). Ceramics based on titanium nitride and silicon nitride sintered by SPS-method. В IOP Conference Series: Materials Science and Engineering (1 ред., Том 93). [012030] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/93/1/012030