Capacitor units with air insulation for linear transformers

A. A. Zherlitsyn, B. M. Kovalchuk, G. V. Smorudov

    Результат исследований: Материалы для журналаСтатьярецензирование

    13 Цитирования (Scopus)

    Аннотация

    The design of two capacitor units intended for use in high-power pulsed generators is described and the results of their tests are presented. Each unit is an assembly consisting of a multichannel spark gap and two capacitors with a total capacitance of 80 or 16 nF and a charging voltage of up to 100 kV. The use of air at atmospheric pressure as the insulating and working medium of the spark gap is a feature of the capacitor units. The following parameters of the output pulses were obtained at a resistive load for the 80- and 16-nF units: currents of ∼48 and ∼20 kA, voltages of ∼55 and ∼52 kV, and times of energy deposition into the load of ∼140 and ∼60 ns, respectively. A model for numerical calculation of the transient discharge process in the capacitor units is presented and the influence of the capacitance of the capacitors and the number of spark channels in the spark gap on the parameters of the generated pulse is analyzed.

    Язык оригиналаАнглийский
    Страницы (с-по)802-813
    Число страниц12
    ЖурналInstruments and Experimental Techniques
    Том52
    Номер выпуска6
    DOI
    СостояниеОпубликовано - ноя 2009

    ASJC Scopus subject areas

    • Instrumentation

    Fingerprint Подробные сведения о темах исследования «Capacitor units with air insulation for linear transformers». Вместе они формируют уникальный семантический отпечаток (fingerprint).

    Цитировать