Application of Ti-Al powder cathodes for vacuum-arc synthesis of nitride coatings

G. A. Pribytkov, I. A. Firsina, E. N. Korosteleva, V. V. Korzhova, I. B. Stepanov, Yu F. Ivanov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The structure and properties of the coatings obtained by vacuum-arc evaporation of the experimental sintered cathodes of Ti-Al composition were studied for comparison with the conventionally used titanium and titanium-aluminum metallurgical cathodes. It was established that the coatings of the powder cathodes contain nanocrystalline components, have ultrahigh hardness and wear resistance, and have a low coefficient of friction against steel. The surface roughness of the coatings deposited by evaporation of the experimental powder cathodes is significantly less than that of coatings deposited during simultaneous separate evaporation of single-element titanium and aluminum cathodes.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
РедакторыVictor E. Panin, Sergey G. Psakhie, Vasily M. Fomin
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735419124
DOI
СостояниеОпубликовано - 19 ноя 2019
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20195 окт 2019

Серия публикаций

НазваниеAIP Conference Proceedings
Том2167
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
СтранаРоссийская Федерация
ГородTomsk
Период1.10.195.10.19

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Application of Ti-Al powder cathodes for vacuum-arc synthesis of nitride coatings». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Pribytkov, G. A., Firsina, I. A., Korosteleva, E. N., Korzhova, V. V., Stepanov, I. B., & Ivanov, Y. F. (2019). Application of Ti-Al powder cathodes for vacuum-arc synthesis of nitride coatings. В V. E. Panin, S. G. Psakhie, & V. M. Fomin (Ред.), Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 [020288] (AIP Conference Proceedings; Том 2167). American Institute of Physics Inc.. https://doi.org/10.1063/1.5132155