Application of Electric-Arc Pulsed Mode for Obtaining Surfacings of Fe-Mo-Cr-Ti-Ni-Cu-Al-System

Anatoly F. Knyaz'Kov, Ivan A. Ditenberg, Aleksey N. Gavrilin, Konstantin V. Grinyaev, Sergey A. Knyaz'Kov, Ivan V. Smirnov

Результат исследований: Материалы для журналарецензирование

Аннотация

Method of electric-arc melting with nonconsumable electrode in a protective argon atmosphere with using a pulsed mode was used to show possibility in principle of obtaining multi-component metallic surfacing of Fe-Mo-Cr-Ti-Ni-Cu-Al system on uncooled steel substrate. Features of structure and elemental composition were studied using scanning electron microscopy methods. Component intermixing of the surfacing is observed. Surfacing microhardness is 5 times greater than that of the substrate. «Surfacing-substrate» boundary has high adhesion strength.

Язык оригиналаАнглийский
Номер статьи012031
ЖурналIOP Conference Series: Materials Science and Engineering
Том253
Номер выпуска1
DOI
СостояниеОпубликовано - 23 окт 2017
СобытиеInternational Scientific-Practical Conference: Innovations in Fuel and Energy Complex and Mechanical Engineering, FEC 2017 - Kemerovo, Российская Федерация
Продолжительность: 18 апр 201721 апр 2017

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Application of Electric-Arc Pulsed Mode for Obtaining Surfacings of Fe-Mo-Cr-Ti-Ni-Cu-Al-System». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать