Application of 3D computed microtomography for investigating the microstructural defects of carbon fiber reinforced composite made by 3D-printing

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The microstructural defect of additive manufactured 3-component carbon fiber reinforced polymer (CFRP) composites has been studied using the computed microtomography. The samples have been prepared using a 3D-printing process developed at Skolkovo Institute of Science and Technology, Russia. The research procedure has been described and internal defects of the fiber composite material have been detected and analyzed using a 3D image reconstructed from a number of cross section views. The defects larger 50 μm have been detected using the computed microtomography test. Defect-free images and defects typical for this type of composites such as delamination in polymer matrix and between fibers in a bundle, fiber breakage have been obtained.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials for Technical and Medical Purpose
ИздательTrans Tech Publications Ltd
Страницы324-327
Число страниц4
Том712
ISBN (печатное издание)9783035710649
DOI
СостояниеОпубликовано - 2016
СобытиеWorkshop on Advanced Materials for Technical and Medical Purpose, AMTMP-2016 - Tomsk, Российская Федерация
Продолжительность: 15 фев 201617 фев 2016

Серия публикаций

НазваниеKey Engineering Materials
Том712
ISSN (печатное издание)10139826

Конференция

КонференцияWorkshop on Advanced Materials for Technical and Medical Purpose, AMTMP-2016
СтранаРоссийская Федерация
ГородTomsk
Период15.2.1617.2.16

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Application of 3D computed microtomography for investigating the microstructural defects of carbon fiber reinforced composite made by 3D-printing». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Filippov, A. V., Rubtsov, V. E., Tarasov, S. Y., & Beloborodov, V. A. (2016). Application of 3D computed microtomography for investigating the microstructural defects of carbon fiber reinforced composite made by 3D-printing. В Advanced Materials for Technical and Medical Purpose (Том 712, стр. 324-327). (Key Engineering Materials; Том 712). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.712.324