An experimental study of the influence of a thermosyphon filling ratio on a temperature distribution in characteristic points along the vapor channel height

Результат исследований: Материалы для журналаСтатья

6 Цитирования (Scopus)

Выдержка

Results of experimental studies of heat transfer in a thermosyphon illustrating the influence of the filling ratio and the heat load on the temperature distribution in the vapor channel, evaporation and condensation zones are presented. The thermosyphon was made of copper and was 161 mm high with side walls 1.5 mm thick, bottom cover 2 mm thick, an internal dimmer of the evaporation part of 54 mm and an internal diameter of the vapor channel of 39.2 mm. Based on the results of experimental studies, temperature dependences were established in the characteristic cross sections of the thermosyphon on the heat flux value supplied to the bottom cover. In addition, a well-Appearing thermosyphon self-regulation property has been found-The growth of the heat load in the evaporation zone in the range from 1940 to 7685 W/m2 does not lead to a decrease in the heat removal intensity from the heat-release region.

Язык оригиналаАнглийский
Номер статьи01062
ЖурналMATEC Web of Conferences
Том110
DOI
СостояниеОпубликовано - 19 июн 2017

Отпечаток

Thermosyphons
Temperature distribution
Vapors
Evaporation
Thermal load
Heat flux
Copper
Condensation
Heat transfer
Temperature
Hot Temperature

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

Цитировать

@article{74365d518363496d927943aa2ac1dac5,
title = "An experimental study of the influence of a thermosyphon filling ratio on a temperature distribution in characteristic points along the vapor channel height",
abstract = "Results of experimental studies of heat transfer in a thermosyphon illustrating the influence of the filling ratio and the heat load on the temperature distribution in the vapor channel, evaporation and condensation zones are presented. The thermosyphon was made of copper and was 161 mm high with side walls 1.5 mm thick, bottom cover 2 mm thick, an internal dimmer of the evaporation part of 54 mm and an internal diameter of the vapor channel of 39.2 mm. Based on the results of experimental studies, temperature dependences were established in the characteristic cross sections of the thermosyphon on the heat flux value supplied to the bottom cover. In addition, a well-Appearing thermosyphon self-regulation property has been found-The growth of the heat load in the evaporation zone in the range from 1940 to 7685 W/m2 does not lead to a decrease in the heat removal intensity from the heat-release region.",
author = "Atlant Nurpeiis and Evgeniya Orlova and Konstantin Ponomarev",
year = "2017",
month = "6",
day = "19",
doi = "10.1051/matecconf/201711001062",
language = "English",
volume = "110",
journal = "MATEC Web of Conferences",

}

TY - JOUR

T1 - An experimental study of the influence of a thermosyphon filling ratio on a temperature distribution in characteristic points along the vapor channel height

AU - Nurpeiis, Atlant

AU - Orlova, Evgeniya

AU - Ponomarev, Konstantin

PY - 2017/6/19

Y1 - 2017/6/19

N2 - Results of experimental studies of heat transfer in a thermosyphon illustrating the influence of the filling ratio and the heat load on the temperature distribution in the vapor channel, evaporation and condensation zones are presented. The thermosyphon was made of copper and was 161 mm high with side walls 1.5 mm thick, bottom cover 2 mm thick, an internal dimmer of the evaporation part of 54 mm and an internal diameter of the vapor channel of 39.2 mm. Based on the results of experimental studies, temperature dependences were established in the characteristic cross sections of the thermosyphon on the heat flux value supplied to the bottom cover. In addition, a well-Appearing thermosyphon self-regulation property has been found-The growth of the heat load in the evaporation zone in the range from 1940 to 7685 W/m2 does not lead to a decrease in the heat removal intensity from the heat-release region.

AB - Results of experimental studies of heat transfer in a thermosyphon illustrating the influence of the filling ratio and the heat load on the temperature distribution in the vapor channel, evaporation and condensation zones are presented. The thermosyphon was made of copper and was 161 mm high with side walls 1.5 mm thick, bottom cover 2 mm thick, an internal dimmer of the evaporation part of 54 mm and an internal diameter of the vapor channel of 39.2 mm. Based on the results of experimental studies, temperature dependences were established in the characteristic cross sections of the thermosyphon on the heat flux value supplied to the bottom cover. In addition, a well-Appearing thermosyphon self-regulation property has been found-The growth of the heat load in the evaporation zone in the range from 1940 to 7685 W/m2 does not lead to a decrease in the heat removal intensity from the heat-release region.

UR - http://www.scopus.com/inward/record.url?scp=85021335876&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85021335876&partnerID=8YFLogxK

U2 - 10.1051/matecconf/201711001062

DO - 10.1051/matecconf/201711001062

M3 - Article

AN - SCOPUS:85021335876

VL - 110

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

M1 - 01062

ER -