An experimental modeling and acoustic emission monitoring of abrasive wear in a steel/diabase pair

M. A. Korchuganov, Andrey Vladimirovich Filippov, S. Yu Tarasov, O. A. Podgornyh, N. N. Shamarin, E. O. Filippova

Результат исследований: Материалы для журналаСтатья

Аннотация

The earthmoving of permafrost soil is a critical task for excavation of minerals and construction on new territories. Failure by abrasive wear is the main reason for excavation parts of earthmoving and soil cutting machines. Therefore investigation of this type of wear is a challenge for developing efficient and wear resistant working parts. This paper is focused on conducting tribological experiments with sliding the steel samples over the surface of diabase stone sample where abrasive wear conditions of soil cutting are modeled experimentally. The worn surfaces of all samples have been examined and transfer of metal and stone particles revealed. The acoustic emission (AE) signals have been recorded and related to the results of worn surface analysis. he acoustic emission (AE) signals have been recorded and related to the results of worn surface analysis. As shown the wear intensity correlates to that of acoustic emission. Both acoustic emission signal median frequency and energy are found to be sensitive to the wear mode.

Язык оригиналаАнглийский
Номер статьи020102
ЖурналAIP Conference Proceedings
Том1783
DOI
СостояниеОпубликовано - 10 ноя 2016
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Российская Федерация
Продолжительность: 19 сен 201623 сен 2016

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «An experimental modeling and acoustic emission monitoring of abrasive wear in a steel/diabase pair». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать