An effective tool to control spatial resolution colloid lithography

Elena Miliutina, Olga Guselnikova, Roman Elashnikov, Vasilii Burtsev, Vaclav Vorcík, Oleksiy Lyutakov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

Polymer-based colloid lithography represents the very effective approach for creation of a large-scale template for subsequent surface modification. Utilization of this approach, however, is significantly restricted by the ability of used micro/nanospheres to create only limited number of symmetrical structures. In this work, we propose the treatment of polystyrene (PS) microspheres in the solvent vapor, before subsequent surface grafting with diazonium salts as an alternative method for the creation of structures with required geometry and symmetry. Application of vapor treatment allows the effective modification of PS microspheres screened area and. As a result, the subsequent grafting procedure leads to the creation of ordered micropores array with tunable size and height. Combination of different solvents with slight heating was studied and found to be suitable for further creation of different surface grafting pattern. The success of surface grafting through the treated PS microsphere mask was verified using Raman spectroscopy and AFM microscopy techniques.

Язык оригиналаАнглийский
Название основной публикацииNANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application
ИздательTANGER Ltd.
Страницы621-625
Число страниц5
ISBN (электронное издание)9788087294895
СостояниеОпубликовано - 1 янв 2019
Событие10th Anniversary International Conference on Nanomaterials - Research and Application, NANOCON 2018 - Brno, Чешская Республика
Продолжительность: 17 окт 201819 окт 2018

Серия публикаций

НазваниеNANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application

Конференция

Конференция10th Anniversary International Conference on Nanomaterials - Research and Application, NANOCON 2018
СтранаЧешская Республика
ГородBrno
Период17.10.1819.10.18

Отпечаток

Polystyrenes
Colloids
Microspheres
Lithography
Nanospheres
Raman Spectrum Analysis
Vapors
Masks
Heating
Microscopy
Polymers
Salts
Surface treatment
Raman spectroscopy
Microscopic examination
Geometry

ASJC Scopus subject areas

  • Biotechnology
  • Electrical and Electronic Engineering
  • Ceramics and Composites
  • Electronic, Optical and Magnetic Materials

Цитировать

Miliutina, E., Guselnikova, O., Elashnikov, R., Burtsev, V., Vorcík, V., & Lyutakov, O. (2019). An effective tool to control spatial resolution colloid lithography. В NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application (стр. 621-625). (NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application). TANGER Ltd..

An effective tool to control spatial resolution colloid lithography. / Miliutina, Elena; Guselnikova, Olga; Elashnikov, Roman; Burtsev, Vasilii; Vorcík, Vaclav; Lyutakov, Oleksiy.

NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application. TANGER Ltd., 2019. стр. 621-625 (NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application).

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Miliutina, E, Guselnikova, O, Elashnikov, R, Burtsev, V, Vorcík, V & Lyutakov, O 2019, An effective tool to control spatial resolution colloid lithography. в NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application. NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application, TANGER Ltd., стр. 621-625, Brno, Чешская Республика, 17.10.18.
Miliutina E, Guselnikova O, Elashnikov R, Burtsev V, Vorcík V, Lyutakov O. An effective tool to control spatial resolution colloid lithography. В NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application. TANGER Ltd. 2019. стр. 621-625. (NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application).
Miliutina, Elena ; Guselnikova, Olga ; Elashnikov, Roman ; Burtsev, Vasilii ; Vorcík, Vaclav ; Lyutakov, Oleksiy. / An effective tool to control spatial resolution colloid lithography. NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application. TANGER Ltd., 2019. стр. 621-625 (NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application).
@inproceedings{3afd15bcfcf04810a9c7d1e84fabfd90,
title = "An effective tool to control spatial resolution colloid lithography",
abstract = "Polymer-based colloid lithography represents the very effective approach for creation of a large-scale template for subsequent surface modification. Utilization of this approach, however, is significantly restricted by the ability of used micro/nanospheres to create only limited number of symmetrical structures. In this work, we propose the treatment of polystyrene (PS) microspheres in the solvent vapor, before subsequent surface grafting with diazonium salts as an alternative method for the creation of structures with required geometry and symmetry. Application of vapor treatment allows the effective modification of PS microspheres screened area and. As a result, the subsequent grafting procedure leads to the creation of ordered micropores array with tunable size and height. Combination of different solvents with slight heating was studied and found to be suitable for further creation of different surface grafting pattern. The success of surface grafting through the treated PS microsphere mask was verified using Raman spectroscopy and AFM microscopy techniques.",
keywords = "Colloid lithography, Periodical structures, Polystyrene microspheres, Vapor annealing",
author = "Elena Miliutina and Olga Guselnikova and Roman Elashnikov and Vasilii Burtsev and Vaclav Vorc{\'i}k and Oleksiy Lyutakov",
year = "2019",
month = "1",
day = "1",
language = "English",
series = "NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application",
publisher = "TANGER Ltd.",
pages = "621--625",
booktitle = "NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application",

}

TY - GEN

T1 - An effective tool to control spatial resolution colloid lithography

AU - Miliutina, Elena

AU - Guselnikova, Olga

AU - Elashnikov, Roman

AU - Burtsev, Vasilii

AU - Vorcík, Vaclav

AU - Lyutakov, Oleksiy

PY - 2019/1/1

Y1 - 2019/1/1

N2 - Polymer-based colloid lithography represents the very effective approach for creation of a large-scale template for subsequent surface modification. Utilization of this approach, however, is significantly restricted by the ability of used micro/nanospheres to create only limited number of symmetrical structures. In this work, we propose the treatment of polystyrene (PS) microspheres in the solvent vapor, before subsequent surface grafting with diazonium salts as an alternative method for the creation of structures with required geometry and symmetry. Application of vapor treatment allows the effective modification of PS microspheres screened area and. As a result, the subsequent grafting procedure leads to the creation of ordered micropores array with tunable size and height. Combination of different solvents with slight heating was studied and found to be suitable for further creation of different surface grafting pattern. The success of surface grafting through the treated PS microsphere mask was verified using Raman spectroscopy and AFM microscopy techniques.

AB - Polymer-based colloid lithography represents the very effective approach for creation of a large-scale template for subsequent surface modification. Utilization of this approach, however, is significantly restricted by the ability of used micro/nanospheres to create only limited number of symmetrical structures. In this work, we propose the treatment of polystyrene (PS) microspheres in the solvent vapor, before subsequent surface grafting with diazonium salts as an alternative method for the creation of structures with required geometry and symmetry. Application of vapor treatment allows the effective modification of PS microspheres screened area and. As a result, the subsequent grafting procedure leads to the creation of ordered micropores array with tunable size and height. Combination of different solvents with slight heating was studied and found to be suitable for further creation of different surface grafting pattern. The success of surface grafting through the treated PS microsphere mask was verified using Raman spectroscopy and AFM microscopy techniques.

KW - Colloid lithography

KW - Periodical structures

KW - Polystyrene microspheres

KW - Vapor annealing

UR - http://www.scopus.com/inward/record.url?scp=85062970525&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85062970525&partnerID=8YFLogxK

M3 - Conference contribution

T3 - NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application

SP - 621

EP - 625

BT - NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application

PB - TANGER Ltd.

ER -