Algorithm for phasing a segmented mirror

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Аннотация

This paper considers the problem of forming a preset surface of a segmented mirror of a telescope. An iteration algorithm based on analysis of the interference pattern of the radiation reflected from the mirror is used for phasing the mirror segments. At every iteration, the current interferogram is compared with the reference one obtained for the surface of a preset shape. The value of the control goal function, whose minimum is determined in the algorithm, decreases with the decreasing discrepancy between the interferograms. This technique provides for formation of a plane-reflecting surface of the mirror, if the relative displacement of segments does not exceed the half wavelength. It is shown that to extend the range of acceptable displacements, it is necessary to introduce additional sources of radiation of specially chosen wavelengths. In such a case, the dynamic range of the algorithm can be extended up to 30 μm.

Язык оригиналаАнглийский
Название основной публикацииProceedings of SPIE - The International Society for Optical Engineering
РедакторыD.B. Calia, B.L. Ellerbroek, R. Ragazzoni
Страницы1556-1563
Число страниц8
Том5490
ИзданиеPART 3
DOI
СостояниеОпубликовано - 2004
СобытиеAdvancements in Adaptive Optics - Glasgow, Великобритания
Продолжительность: 21 июн 200425 июн 2004

Другое

ДругоеAdvancements in Adaptive Optics
СтранаВеликобритания
ГородGlasgow
Период21.6.0425.6.04

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Fingerprint Подробные сведения о темах исследования «Algorithm for phasing a segmented mirror». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Kanev, F. Y., Lukin, V. P., & Makenova, N. A. (2004). Algorithm for phasing a segmented mirror. В D. B. Calia, B. L. Ellerbroek, & R. Ragazzoni (Ред.), Proceedings of SPIE - The International Society for Optical Engineering (PART 3 ред., Том 5490, стр. 1556-1563). [185] https://doi.org/10.1117/12.552973