Additive manufactured Ti6Al4V scaffolds with the RF- magnetron sputter deposited hydroxyapatite coating

E. Chudinova, M. Surmeneva, A. Koptioug, P. Scoglund, R. Surmenev

Результат исследований: Материалы для журналаСтатья

8 Цитирования (Scopus)

Аннотация

Present paper reports on the results of surface modification of the additively manufactured porous Ti6Al4V scaffolds. Radio frequency (RF) magnetron sputtering was used to modify the surface of the alloy via deposition of the biocompatible hydroxyapatite (HA) coating. The surface morphology, chemical and phase composition of the HA-coated alloy were studied. It was revealed that RF magnetron sputtering allows preparing a homogeneous HA coating onto the entire surface of scaffolds.

Язык оригиналаАнглийский
Номер статьи012004
ЖурналJournal of Physics: Conference Series
Том669
Номер выпуска1
DOI
СостояниеОпубликовано - 14 янв 2016

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Additive manufactured Ti6Al4V scaffolds with the RF- magnetron sputter deposited hydroxyapatite coating». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать