Аннотация
A method to stabilize cryogenic detectors with superconducting phase transition thermometers in their operating point is presented. Measurements of X-ray lines emitted by an 55Fe X-ray fluorescence source showed an improvement in energy resolution from 230 to 133 eV on the 1.5 keV aluminum line with this technique. Furthermore the required set-up allows to simulate real events by injecting heat pulses into the thermometer and in this way to calibrate the detector and to monitor its long-term stability.
| Язык оригинала | Английский |
|---|---|
| Страницы (с-по) | 350-352 |
| Число страниц | 3 |
| Журнал | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment |
| Том | 444 |
| Номер выпуска | 1 |
| DOI | |
| Состояние | Опубликовано - 7 апр 2000 |
| Событие | 8th International Workshop on Low Temperature Detectors (LTD-8) - Dalfsen, Neth Продолжительность: 15 авг 1999 → 20 авг 1999 |
ASJC Scopus subject areas
- Nuclear and High Energy Physics
- Instrumentation
Fingerprint Подробные сведения о темах исследования «Active thermal feedback for massive cryogenic detectors». Вместе они формируют уникальный семантический отпечаток (fingerprint).
Цитировать
Meier, O., Bravin, M., Bruckmayer, M., Stefano, P. D., Frank, T., Loidl, M., Meunier, P., Pröbst, F., Safran, G., Seidel, W., Sergeyev, I., Sisti, M., Stodolsky, L., Uchaikin, S., & Zerle, L. (2000). Active thermal feedback for massive cryogenic detectors. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 444(1), 350-352. https://doi.org/10.1016/S0168-9002(99)01390-X