A copper bromide vapour laser with a high pulse repetition rate

D. V. Shiyanov, G. S. Evtushenko, V. B. Sukhanov, V. F. Fedorov

Результат исследований: Материалы для журналаСтатья

11 Цитирования (Scopus)

Аннотация

The results of an experimental study of a copper bromide vapour laser with a discharge-channel diameter above 2.5 cm and a high pump-pulse repetition rate are presented. A TGU1-1000/25 high-power tacitron used as a switch made it possible to obtain for the first time a fairly high output radiation power for pump-pulse repetition rates exceeding 200 kHz. At a maximum pump-pulse repetition rate of 250 kHz achieved in a laser tube 2.6 cm in diameter and 76 cm long, the output power was 1.5 W. The output powers of 3 and 10.5 W were reached for pump-pulse repetition rates of 200 and 100 kHz, respectively. These characteristics were obtained without circulating a buffer gas and (or) low-concentration active impurities through the active volume.

Язык оригиналаАнглийский
Страницы (с-по)680-682
Число страниц3
ЖурналQuantum Electronics
Том32
Номер выпуска8
DOI
СостояниеОпубликовано - авг 2002

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Physics and Astronomy (miscellaneous)

Fingerprint Подробные сведения о темах исследования «A copper bromide vapour laser with a high pulse repetition rate». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать