A Computer Model of the Evaporator for the Development of an Automatic Control System

K. A. Kozin, E. V. Efremov, O. P. Kabrysheva, M. I. Grachev

Результат исследований: Материалы для журналаСтатья

2 Цитирования (Scopus)

Аннотация

For the implementation of a closed nuclear fuel cycle it is necessary to carry out a series of experimental studies to justify the choice of technology. In addition, the operation of the radiochemical plant is impossible without high-quality automatic control systems. In the technologies of spent nuclear fuel reprocessing, the method of continuous evaporation is often used for a solution conditioning. Therefore, the effective continuous technological process will depend on the operation of the evaporation equipment. Its essential difference from similar devices is a small size. In this paper the method of mathematic simulation is applied for the investigation of one-effect evaporator with an external heating chamber. Detailed modelling is quite difficult because the phase equilibrium dynamics of the evaporation process is not described. Moreover, there is a relationship with the other process units. The results proved that the study subject is a MIMO plant, nonlinear over separate control channels and not selfbalancing. Adequacy was tested using the experimental data obtained at the laboratory evaporation unit.

Язык оригиналаАнглийский
Номер статьи012043
ЖурналIOP Conference Series: Materials Science and Engineering
Том142
Номер выпуска1
DOI
СостояниеОпубликовано - 2 сен 2016

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «A Computer Model of the Evaporator for the Development of an Automatic Control System». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать