15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system

Andrey S. Goponenko, Oleg V. Stukach, Arman B. Mirmanov, Vladislav A. Kochumeev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

3 Цитирования (Scopus)

Аннотация

This paper describes the design of Gunn diode hybrid-integrated power transmitter at X-band. The device delivers about 15 Watt of pulse output power, in short-pulse operating conditions, at 9.5-10.5 GHz central frequency. The transmitter is designed to be used as final stage of a downlink measurement-while-drilling transmitter for telemetry system. A commercial Gunn diode has been selected for design. Due to the MWD application, special attention must be put on the process and reliability: to this aim temperature of the active device must be kept within the value established by borehole requirements and carefully controlled. This makes the design objective very tight. The power transmitter design and some measurement results are presented in the paper.

Язык оригиналаАнглийский
Название основной публикацииInternational Conference on Systems, Signals, and Image Processing
ИздательIEEE Computer Society
Страницы243-246
Число страниц4
ISBN (печатное издание)9789531841917
СостояниеОпубликовано - 2014
Событие21st International Conference on Systems, Signals and Image Processing, IWSSIP 2014 - Dubrovnik, Хорватия
Продолжительность: 12 мая 201415 мая 2014

Другое

Другое21st International Conference on Systems, Signals and Image Processing, IWSSIP 2014
СтранаХорватия
ГородDubrovnik
Период12.5.1415.5.14

ASJC Scopus subject areas

  • Artificial Intelligence
  • Computer Networks and Communications
  • Signal Processing
  • Software

Fingerprint Подробные сведения о темах исследования «15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать