Wire feed electron beam additive manufacturing of metallic components

S. V. Fortuna, A. V. Filippov, E. A. Kolubaev, A. S. Fortuna, D. A. Gurianov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The results of the research show that it is possible to make axisymmetric blanks of satisfying quality and geometrical sizes using the process of wire feed electron additive manufacturing (3D-printing). Yield strength of blank's material achieves 317 MPa, which is higher than that of base cast metal (SS321). It was figured out that varying the additive manufacturing parameters such as wire feed rate and substrate rotation rate one may finally obtain printed components of various microstructure and mechanical characteristics. In other words, the parameters of the process can be operated and combined in order to gain needed mechanical characteristics' anisotropy of the material manufactured by wire feed 3D printing.

Original languageEnglish
Title of host publicationProceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
EditorsVasily M. Fomin, Victor E. Panin, Sergey G. Psakhie
PublisherAmerican Institute of Physics Inc.
Volume2051
ISBN (Electronic)9780735417779
DOIs
Publication statusPublished - 12 Dec 2018
EventInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018 - Tomsk, Russian Federation
Duration: 1 Oct 20185 Oct 2018

Conference

ConferenceInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018
CountryRussian Federation
CityTomsk
Period1.10.185.10.18

Fingerprint

manufacturing
blanks
wire
electron beams
printing
yield strength
casts
microstructure
anisotropy
metals
electrons

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Fortuna, S. V., Filippov, A. V., Kolubaev, E. A., Fortuna, A. S., & Gurianov, D. A. (2018). Wire feed electron beam additive manufacturing of metallic components. In V. M. Fomin, V. E. Panin, & S. G. Psakhie (Eds.), Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures (Vol. 2051). [020092] American Institute of Physics Inc.. https://doi.org/10.1063/1.5083335

Wire feed electron beam additive manufacturing of metallic components. / Fortuna, S. V.; Filippov, A. V.; Kolubaev, E. A.; Fortuna, A. S.; Gurianov, D. A.

Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. ed. / Vasily M. Fomin; Victor E. Panin; Sergey G. Psakhie. Vol. 2051 American Institute of Physics Inc., 2018. 020092.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fortuna, SV, Filippov, AV, Kolubaev, EA, Fortuna, AS & Gurianov, DA 2018, Wire feed electron beam additive manufacturing of metallic components. in VM Fomin, VE Panin & SG Psakhie (eds), Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. vol. 2051, 020092, American Institute of Physics Inc., International Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018, Tomsk, Russian Federation, 1.10.18. https://doi.org/10.1063/1.5083335
Fortuna SV, Filippov AV, Kolubaev EA, Fortuna AS, Gurianov DA. Wire feed electron beam additive manufacturing of metallic components. In Fomin VM, Panin VE, Psakhie SG, editors, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Vol. 2051. American Institute of Physics Inc. 2018. 020092 https://doi.org/10.1063/1.5083335
Fortuna, S. V. ; Filippov, A. V. ; Kolubaev, E. A. ; Fortuna, A. S. ; Gurianov, D. A. / Wire feed electron beam additive manufacturing of metallic components. Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. editor / Vasily M. Fomin ; Victor E. Panin ; Sergey G. Psakhie. Vol. 2051 American Institute of Physics Inc., 2018.
@inproceedings{3c9a7a96215646e3aacca6db7e939a99,
title = "Wire feed electron beam additive manufacturing of metallic components",
abstract = "The results of the research show that it is possible to make axisymmetric blanks of satisfying quality and geometrical sizes using the process of wire feed electron additive manufacturing (3D-printing). Yield strength of blank's material achieves 317 MPa, which is higher than that of base cast metal (SS321). It was figured out that varying the additive manufacturing parameters such as wire feed rate and substrate rotation rate one may finally obtain printed components of various microstructure and mechanical characteristics. In other words, the parameters of the process can be operated and combined in order to gain needed mechanical characteristics' anisotropy of the material manufactured by wire feed 3D printing.",
author = "Fortuna, {S. V.} and Filippov, {A. V.} and Kolubaev, {E. A.} and Fortuna, {A. S.} and Gurianov, {D. A.}",
year = "2018",
month = "12",
day = "12",
doi = "10.1063/1.5083335",
language = "English",
volume = "2051",
editor = "Fomin, {Vasily M.} and Panin, {Victor E.} and Psakhie, {Sergey G.}",
booktitle = "Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Wire feed electron beam additive manufacturing of metallic components

AU - Fortuna, S. V.

AU - Filippov, A. V.

AU - Kolubaev, E. A.

AU - Fortuna, A. S.

AU - Gurianov, D. A.

PY - 2018/12/12

Y1 - 2018/12/12

N2 - The results of the research show that it is possible to make axisymmetric blanks of satisfying quality and geometrical sizes using the process of wire feed electron additive manufacturing (3D-printing). Yield strength of blank's material achieves 317 MPa, which is higher than that of base cast metal (SS321). It was figured out that varying the additive manufacturing parameters such as wire feed rate and substrate rotation rate one may finally obtain printed components of various microstructure and mechanical characteristics. In other words, the parameters of the process can be operated and combined in order to gain needed mechanical characteristics' anisotropy of the material manufactured by wire feed 3D printing.

AB - The results of the research show that it is possible to make axisymmetric blanks of satisfying quality and geometrical sizes using the process of wire feed electron additive manufacturing (3D-printing). Yield strength of blank's material achieves 317 MPa, which is higher than that of base cast metal (SS321). It was figured out that varying the additive manufacturing parameters such as wire feed rate and substrate rotation rate one may finally obtain printed components of various microstructure and mechanical characteristics. In other words, the parameters of the process can be operated and combined in order to gain needed mechanical characteristics' anisotropy of the material manufactured by wire feed 3D printing.

UR - http://www.scopus.com/inward/record.url?scp=85059013530&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059013530&partnerID=8YFLogxK

U2 - 10.1063/1.5083335

DO - 10.1063/1.5083335

M3 - Conference contribution

VL - 2051

BT - Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures

A2 - Fomin, Vasily M.

A2 - Panin, Victor E.

A2 - Psakhie, Sergey G.

PB - American Institute of Physics Inc.

ER -