Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation

T. Poowadin, S. V. Panin, Victor Petrovich Sergeev, L. A. Kornienko, L. R. Ivanova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Ultra high molecular weight polyethylene (UHMWPE) is a promising polymeric material for mechanical engineering combining such properties as low coefficient of friction, resistance to corrosive chemicals, has extremely low moisture absorption, high abrasion resistance and high impact strength. Recent large studies attempt toward improvements in tribotechnical properties of UHMWPE by adding fillers or using ion beam to modify surface of this material. In this paper wear resistance of UHMWPE composites was studied using block-on-ring test under dry sliding friction. The effects of adding carbon nano-fiber (CNF) 0.5wt% and treatment by aluminum boron (AlBx) ion implantation onto wear resistance are reported. The main purpose was to find the rational dose and study the influence of ion dose variation onto wear of UHMWPE composite. The specimens were treated with AlBx ion dose varied from 0.5*1017-2*1017 ion/cm2. It was found that UHMWPE+CNF specimen (without ion implantation) gives high wear resistance up to 4 times and implanted specimen at ion dose of 1*10 17 ion/cm2 gives high wear resistance up to 3 times compare with pure UHGMWPE. Furthermore it was also shown that AlBx ion implantation is not an effective way to increase wear resistance of UHMWPE+CNF composites which is most likely due to the influence of different thermal conductivities of the polymer matrix and carbon nano-fiber during treatment and subsequent crystallization. The thickness of the modified surface layer with a lamellar structure increased with increasing dose, reaching a maximum value of 600 microns.

Original languageEnglish
Title of host publicationProceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012
DOIs
Publication statusPublished - 2012
Event2012 7th International Forum on Strategic Technology, IFOST 2012 - Tomsk, Russian Federation
Duration: 18 Sep 201221 Sep 2012

Other

Other2012 7th International Forum on Strategic Technology, IFOST 2012
CountryRussian Federation
CityTomsk
Period18.9.1221.9.12

Fingerprint

Ultrahigh molecular weight polyethylenes
Ion implantation
Wear resistance
Nanocomposites
Carbon
Ions
Fibers
Composite materials
Friction
Lamellar structures
Impact strength
Mechanical engineering
Polymer matrix
Ion beams
Boron
Polyethylene
Implantation
Fillers
Thermal conductivity
Moisture

Keywords

  • Carbon nanofiber
  • Friction
  • Ion implantation
  • Surface treatment
  • UHMWPE
  • Wear resistance

ASJC Scopus subject areas

  • Management of Technology and Innovation

Cite this

Poowadin, T., Panin, S. V., Sergeev, V. P., Kornienko, L. A., & Ivanova, L. R. (2012). Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation. In Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012 [6357569] https://doi.org/10.1109/IFOST.2012.6357569

Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation. / Poowadin, T.; Panin, S. V.; Sergeev, Victor Petrovich; Kornienko, L. A.; Ivanova, L. R.

Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357569.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Poowadin, T, Panin, SV, Sergeev, VP, Kornienko, LA & Ivanova, LR 2012, Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation. in Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012., 6357569, 2012 7th International Forum on Strategic Technology, IFOST 2012, Tomsk, Russian Federation, 18.9.12. https://doi.org/10.1109/IFOST.2012.6357569
Poowadin T, Panin SV, Sergeev VP, Kornienko LA, Ivanova LR. Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation. In Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357569 https://doi.org/10.1109/IFOST.2012.6357569
Poowadin, T. ; Panin, S. V. ; Sergeev, Victor Petrovich ; Kornienko, L. A. ; Ivanova, L. R. / Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation. Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012.
@inproceedings{da1811bdbb24469c876d0a0ac69c8390,
title = "Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation",
abstract = "Ultra high molecular weight polyethylene (UHMWPE) is a promising polymeric material for mechanical engineering combining such properties as low coefficient of friction, resistance to corrosive chemicals, has extremely low moisture absorption, high abrasion resistance and high impact strength. Recent large studies attempt toward improvements in tribotechnical properties of UHMWPE by adding fillers or using ion beam to modify surface of this material. In this paper wear resistance of UHMWPE composites was studied using block-on-ring test under dry sliding friction. The effects of adding carbon nano-fiber (CNF) 0.5wt{\%} and treatment by aluminum boron (AlBx) ion implantation onto wear resistance are reported. The main purpose was to find the rational dose and study the influence of ion dose variation onto wear of UHMWPE composite. The specimens were treated with AlBx ion dose varied from 0.5*1017-2*1017 ion/cm2. It was found that UHMWPE+CNF specimen (without ion implantation) gives high wear resistance up to 4 times and implanted specimen at ion dose of 1*10 17 ion/cm2 gives high wear resistance up to 3 times compare with pure UHGMWPE. Furthermore it was also shown that AlBx ion implantation is not an effective way to increase wear resistance of UHMWPE+CNF composites which is most likely due to the influence of different thermal conductivities of the polymer matrix and carbon nano-fiber during treatment and subsequent crystallization. The thickness of the modified surface layer with a lamellar structure increased with increasing dose, reaching a maximum value of 600 microns.",
keywords = "Carbon nanofiber, Friction, Ion implantation, Surface treatment, UHMWPE, Wear resistance",
author = "T. Poowadin and Panin, {S. V.} and Sergeev, {Victor Petrovich} and Kornienko, {L. A.} and Ivanova, {L. R.}",
year = "2012",
doi = "10.1109/IFOST.2012.6357569",
language = "English",
isbn = "9781467317702",
booktitle = "Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012",

}

TY - GEN

T1 - Wear resistance of UHMWPE-based carbon nanocomposite subsequent AlB x ion implantation

AU - Poowadin, T.

AU - Panin, S. V.

AU - Sergeev, Victor Petrovich

AU - Kornienko, L. A.

AU - Ivanova, L. R.

PY - 2012

Y1 - 2012

N2 - Ultra high molecular weight polyethylene (UHMWPE) is a promising polymeric material for mechanical engineering combining such properties as low coefficient of friction, resistance to corrosive chemicals, has extremely low moisture absorption, high abrasion resistance and high impact strength. Recent large studies attempt toward improvements in tribotechnical properties of UHMWPE by adding fillers or using ion beam to modify surface of this material. In this paper wear resistance of UHMWPE composites was studied using block-on-ring test under dry sliding friction. The effects of adding carbon nano-fiber (CNF) 0.5wt% and treatment by aluminum boron (AlBx) ion implantation onto wear resistance are reported. The main purpose was to find the rational dose and study the influence of ion dose variation onto wear of UHMWPE composite. The specimens were treated with AlBx ion dose varied from 0.5*1017-2*1017 ion/cm2. It was found that UHMWPE+CNF specimen (without ion implantation) gives high wear resistance up to 4 times and implanted specimen at ion dose of 1*10 17 ion/cm2 gives high wear resistance up to 3 times compare with pure UHGMWPE. Furthermore it was also shown that AlBx ion implantation is not an effective way to increase wear resistance of UHMWPE+CNF composites which is most likely due to the influence of different thermal conductivities of the polymer matrix and carbon nano-fiber during treatment and subsequent crystallization. The thickness of the modified surface layer with a lamellar structure increased with increasing dose, reaching a maximum value of 600 microns.

AB - Ultra high molecular weight polyethylene (UHMWPE) is a promising polymeric material for mechanical engineering combining such properties as low coefficient of friction, resistance to corrosive chemicals, has extremely low moisture absorption, high abrasion resistance and high impact strength. Recent large studies attempt toward improvements in tribotechnical properties of UHMWPE by adding fillers or using ion beam to modify surface of this material. In this paper wear resistance of UHMWPE composites was studied using block-on-ring test under dry sliding friction. The effects of adding carbon nano-fiber (CNF) 0.5wt% and treatment by aluminum boron (AlBx) ion implantation onto wear resistance are reported. The main purpose was to find the rational dose and study the influence of ion dose variation onto wear of UHMWPE composite. The specimens were treated with AlBx ion dose varied from 0.5*1017-2*1017 ion/cm2. It was found that UHMWPE+CNF specimen (without ion implantation) gives high wear resistance up to 4 times and implanted specimen at ion dose of 1*10 17 ion/cm2 gives high wear resistance up to 3 times compare with pure UHGMWPE. Furthermore it was also shown that AlBx ion implantation is not an effective way to increase wear resistance of UHMWPE+CNF composites which is most likely due to the influence of different thermal conductivities of the polymer matrix and carbon nano-fiber during treatment and subsequent crystallization. The thickness of the modified surface layer with a lamellar structure increased with increasing dose, reaching a maximum value of 600 microns.

KW - Carbon nanofiber

KW - Friction

KW - Ion implantation

KW - Surface treatment

KW - UHMWPE

KW - Wear resistance

UR - http://www.scopus.com/inward/record.url?scp=84871843555&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84871843555&partnerID=8YFLogxK

U2 - 10.1109/IFOST.2012.6357569

DO - 10.1109/IFOST.2012.6357569

M3 - Conference contribution

SN - 9781467317702

BT - Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012

ER -