Variation of Vickers microhardness and compression strength of the bioceramics based on hydroxyapatite by adding the multi-walled carbon nanotubes

M. S. Barabashko, M. V. Tkachenko, A. A. Neiman, A. N. Ponomarev, A. E. Rezvanova

Research output: Contribution to journalArticle

Abstract

Calcium phosphate ceramics for medical applications with additives of multi-walled carbon nanotubes were synthesized at a temperature of 1100 °C in the argon atmosphere. The concentration of nanotubes ranged from 0.05 to 0.5 wt.%. The morphology and structure of the powder of multi-walled carbon nanotubes and calcium phosphate ceramics have been characterized by the electron microscope. The most part of the initial nanotubes have distributions of outer diameter 10–25 nm. The multi-walled carbon nanotubes are located in the intergranular space, change their shape and aspect ratio. Diffraction patterns of ceramics show that all samples have apatite structure and any distinct reflections except those of hydroxyapatite are detected. The partial carbonization of ceramics is indicated by the results of FT-IR studies. With an increase of the amount of nanotubes in composite ceramics, the intensity of the carbonate stretching band increases, which may be due to partial oxidation of the nanotubes and as a result leads to more intensive carbonization of the apatite phase. It was found that the mechanical properties of ceramics (compression strength and Vickers microhardness) were improved with the increasing of the amount of nanotubes.

Original languageEnglish
JournalApplied Nanoscience (Switzerland)
DOIs
Publication statusPublished - 1 Jan 2019

Fingerprint

Bioceramics
Carbon Nanotubes
Ceramics
Nanotubes
Durapatite
Hydroxyapatite
Microhardness
microhardness
Carbon nanotubes
Compaction
carbon nanotubes
ceramics
nanotubes
Apatites
Apatite
Carbonization
Calcium phosphate
calcium phosphates
carbonization
apatites

Keywords

  • Calcium phosphate ceramics
  • Compression strength
  • Hydroxyapatite
  • Mechanical properties
  • Multi-walled carbon nanotubes
  • Vickers microhardness

ASJC Scopus subject areas

  • Biotechnology
  • Materials Science (miscellaneous)
  • Atomic and Molecular Physics, and Optics
  • Electrical and Electronic Engineering
  • Physical and Theoretical Chemistry
  • Cell Biology

Cite this

Variation of Vickers microhardness and compression strength of the bioceramics based on hydroxyapatite by adding the multi-walled carbon nanotubes. / Barabashko, M. S.; Tkachenko, M. V.; Neiman, A. A.; Ponomarev, A. N.; Rezvanova, A. E.

In: Applied Nanoscience (Switzerland), 01.01.2019.

Research output: Contribution to journalArticle

@article{5a950fd9d4994374a6ee30953805d11a,
title = "Variation of Vickers microhardness and compression strength of the bioceramics based on hydroxyapatite by adding the multi-walled carbon nanotubes",
abstract = "Calcium phosphate ceramics for medical applications with additives of multi-walled carbon nanotubes were synthesized at a temperature of 1100 °C in the argon atmosphere. The concentration of nanotubes ranged from 0.05 to 0.5 wt.{\%}. The morphology and structure of the powder of multi-walled carbon nanotubes and calcium phosphate ceramics have been characterized by the electron microscope. The most part of the initial nanotubes have distributions of outer diameter 10–25 nm. The multi-walled carbon nanotubes are located in the intergranular space, change their shape and aspect ratio. Diffraction patterns of ceramics show that all samples have apatite structure and any distinct reflections except those of hydroxyapatite are detected. The partial carbonization of ceramics is indicated by the results of FT-IR studies. With an increase of the amount of nanotubes in composite ceramics, the intensity of the carbonate stretching band increases, which may be due to partial oxidation of the nanotubes and as a result leads to more intensive carbonization of the apatite phase. It was found that the mechanical properties of ceramics (compression strength and Vickers microhardness) were improved with the increasing of the amount of nanotubes.",
keywords = "Calcium phosphate ceramics, Compression strength, Hydroxyapatite, Mechanical properties, Multi-walled carbon nanotubes, Vickers microhardness",
author = "Barabashko, {M. S.} and Tkachenko, {M. V.} and Neiman, {A. A.} and Ponomarev, {A. N.} and Rezvanova, {A. E.}",
year = "2019",
month = "1",
day = "1",
doi = "10.1007/s13204-019-01019-z",
language = "English",
journal = "Applied Nanoscience (Switzerland)",
issn = "2190-5509",
publisher = "Springer Nature",

}

TY - JOUR

T1 - Variation of Vickers microhardness and compression strength of the bioceramics based on hydroxyapatite by adding the multi-walled carbon nanotubes

AU - Barabashko, M. S.

AU - Tkachenko, M. V.

AU - Neiman, A. A.

AU - Ponomarev, A. N.

AU - Rezvanova, A. E.

PY - 2019/1/1

Y1 - 2019/1/1

N2 - Calcium phosphate ceramics for medical applications with additives of multi-walled carbon nanotubes were synthesized at a temperature of 1100 °C in the argon atmosphere. The concentration of nanotubes ranged from 0.05 to 0.5 wt.%. The morphology and structure of the powder of multi-walled carbon nanotubes and calcium phosphate ceramics have been characterized by the electron microscope. The most part of the initial nanotubes have distributions of outer diameter 10–25 nm. The multi-walled carbon nanotubes are located in the intergranular space, change their shape and aspect ratio. Diffraction patterns of ceramics show that all samples have apatite structure and any distinct reflections except those of hydroxyapatite are detected. The partial carbonization of ceramics is indicated by the results of FT-IR studies. With an increase of the amount of nanotubes in composite ceramics, the intensity of the carbonate stretching band increases, which may be due to partial oxidation of the nanotubes and as a result leads to more intensive carbonization of the apatite phase. It was found that the mechanical properties of ceramics (compression strength and Vickers microhardness) were improved with the increasing of the amount of nanotubes.

AB - Calcium phosphate ceramics for medical applications with additives of multi-walled carbon nanotubes were synthesized at a temperature of 1100 °C in the argon atmosphere. The concentration of nanotubes ranged from 0.05 to 0.5 wt.%. The morphology and structure of the powder of multi-walled carbon nanotubes and calcium phosphate ceramics have been characterized by the electron microscope. The most part of the initial nanotubes have distributions of outer diameter 10–25 nm. The multi-walled carbon nanotubes are located in the intergranular space, change their shape and aspect ratio. Diffraction patterns of ceramics show that all samples have apatite structure and any distinct reflections except those of hydroxyapatite are detected. The partial carbonization of ceramics is indicated by the results of FT-IR studies. With an increase of the amount of nanotubes in composite ceramics, the intensity of the carbonate stretching band increases, which may be due to partial oxidation of the nanotubes and as a result leads to more intensive carbonization of the apatite phase. It was found that the mechanical properties of ceramics (compression strength and Vickers microhardness) were improved with the increasing of the amount of nanotubes.

KW - Calcium phosphate ceramics

KW - Compression strength

KW - Hydroxyapatite

KW - Mechanical properties

KW - Multi-walled carbon nanotubes

KW - Vickers microhardness

UR - http://www.scopus.com/inward/record.url?scp=85065207040&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065207040&partnerID=8YFLogxK

U2 - 10.1007/s13204-019-01019-z

DO - 10.1007/s13204-019-01019-z

M3 - Article

JO - Applied Nanoscience (Switzerland)

JF - Applied Nanoscience (Switzerland)

SN - 2190-5509

ER -