Use of microsecond plasma opening switch for material surface modification

V. M. Bystritskii, S. V. Grigoriev, I. V. Lisitsyn, A. A. Sinebryukhov, V. A. Sinebryukhov, G. E. Remnev, V. K. Strutz

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

The use of microsecond plasma opening switch for material surface modification was studied using two types of plasma sources, the gas-puff plasma guns and regular flashboards, both powered by a capacitor bank of 3 to 6 microfarads. The material modifications were done with several types of the steels, including stainless POS cathode electrode, and samples of P6M5 and CoW steel, distributed along the cathode. Microhardness measurements were performed and surface properties were analyzed.

Original languageEnglish
Title of host publicationIEEE International Pulsed Power Conference - Digest of Technical Papers
EditorsKenneth R. Prestwich, William L. Baker
Place of PublicationPiscataway, NJ, United States
PublisherIEEE
Pages1013-1015
Number of pages3
Volume2
Publication statusPublished - 1993
EventProceedings of the 1993 9th IEEE International Pulsed Power Conference. Part 2 (of 2) - Albuquerque, NM, USA
Duration: 21 Jun 199323 Jun 1993

Other

OtherProceedings of the 1993 9th IEEE International Pulsed Power Conference. Part 2 (of 2)
CityAlbuquerque, NM, USA
Period21.6.9323.6.93

Fingerprint

Surface treatment
Cathodes
Switches
Plasma guns
Plasmas
Plasma sources
Microhardness
Surface properties
Capacitors
Stainless steel
Electrodes
Steel
Gases

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Bystritskii, V. M., Grigoriev, S. V., Lisitsyn, I. V., Sinebryukhov, A. A., Sinebryukhov, V. A., Remnev, G. E., & Strutz, V. K. (1993). Use of microsecond plasma opening switch for material surface modification. In K. R. Prestwich, & W. L. Baker (Eds.), IEEE International Pulsed Power Conference - Digest of Technical Papers (Vol. 2, pp. 1013-1015). Piscataway, NJ, United States: IEEE.

Use of microsecond plasma opening switch for material surface modification. / Bystritskii, V. M.; Grigoriev, S. V.; Lisitsyn, I. V.; Sinebryukhov, A. A.; Sinebryukhov, V. A.; Remnev, G. E.; Strutz, V. K.

IEEE International Pulsed Power Conference - Digest of Technical Papers. ed. / Kenneth R. Prestwich; William L. Baker. Vol. 2 Piscataway, NJ, United States : IEEE, 1993. p. 1013-1015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bystritskii, VM, Grigoriev, SV, Lisitsyn, IV, Sinebryukhov, AA, Sinebryukhov, VA, Remnev, GE & Strutz, VK 1993, Use of microsecond plasma opening switch for material surface modification. in KR Prestwich & WL Baker (eds), IEEE International Pulsed Power Conference - Digest of Technical Papers. vol. 2, IEEE, Piscataway, NJ, United States, pp. 1013-1015, Proceedings of the 1993 9th IEEE International Pulsed Power Conference. Part 2 (of 2), Albuquerque, NM, USA, 21.6.93.
Bystritskii VM, Grigoriev SV, Lisitsyn IV, Sinebryukhov AA, Sinebryukhov VA, Remnev GE et al. Use of microsecond plasma opening switch for material surface modification. In Prestwich KR, Baker WL, editors, IEEE International Pulsed Power Conference - Digest of Technical Papers. Vol. 2. Piscataway, NJ, United States: IEEE. 1993. p. 1013-1015
Bystritskii, V. M. ; Grigoriev, S. V. ; Lisitsyn, I. V. ; Sinebryukhov, A. A. ; Sinebryukhov, V. A. ; Remnev, G. E. ; Strutz, V. K. / Use of microsecond plasma opening switch for material surface modification. IEEE International Pulsed Power Conference - Digest of Technical Papers. editor / Kenneth R. Prestwich ; William L. Baker. Vol. 2 Piscataway, NJ, United States : IEEE, 1993. pp. 1013-1015
@inproceedings{ba35669306724c56829b326c75483008,
title = "Use of microsecond plasma opening switch for material surface modification",
abstract = "The use of microsecond plasma opening switch for material surface modification was studied using two types of plasma sources, the gas-puff plasma guns and regular flashboards, both powered by a capacitor bank of 3 to 6 microfarads. The material modifications were done with several types of the steels, including stainless POS cathode electrode, and samples of P6M5 and CoW steel, distributed along the cathode. Microhardness measurements were performed and surface properties were analyzed.",
author = "Bystritskii, {V. M.} and Grigoriev, {S. V.} and Lisitsyn, {I. V.} and Sinebryukhov, {A. A.} and Sinebryukhov, {V. A.} and Remnev, {G. E.} and Strutz, {V. K.}",
year = "1993",
language = "English",
volume = "2",
pages = "1013--1015",
editor = "Prestwich, {Kenneth R.} and Baker, {William L.}",
booktitle = "IEEE International Pulsed Power Conference - Digest of Technical Papers",
publisher = "IEEE",

}

TY - GEN

T1 - Use of microsecond plasma opening switch for material surface modification

AU - Bystritskii, V. M.

AU - Grigoriev, S. V.

AU - Lisitsyn, I. V.

AU - Sinebryukhov, A. A.

AU - Sinebryukhov, V. A.

AU - Remnev, G. E.

AU - Strutz, V. K.

PY - 1993

Y1 - 1993

N2 - The use of microsecond plasma opening switch for material surface modification was studied using two types of plasma sources, the gas-puff plasma guns and regular flashboards, both powered by a capacitor bank of 3 to 6 microfarads. The material modifications were done with several types of the steels, including stainless POS cathode electrode, and samples of P6M5 and CoW steel, distributed along the cathode. Microhardness measurements were performed and surface properties were analyzed.

AB - The use of microsecond plasma opening switch for material surface modification was studied using two types of plasma sources, the gas-puff plasma guns and regular flashboards, both powered by a capacitor bank of 3 to 6 microfarads. The material modifications were done with several types of the steels, including stainless POS cathode electrode, and samples of P6M5 and CoW steel, distributed along the cathode. Microhardness measurements were performed and surface properties were analyzed.

UR - http://www.scopus.com/inward/record.url?scp=0027903991&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027903991&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0027903991

VL - 2

SP - 1013

EP - 1015

BT - IEEE International Pulsed Power Conference - Digest of Technical Papers

A2 - Prestwich, Kenneth R.

A2 - Baker, William L.

PB - IEEE

CY - Piscataway, NJ, United States

ER -