Transverse profile forming for high energy electron beams using 3D-printed plastic samples

A. A. Bulavskaya, Yu M. Cherepennikov, A. A. Grigorieva, B. M. Gavrikov, A. A. Loginova, I. A. Miloichikova, N. E. Toropkov, S. G. Stuchebrov

Research output: Contribution to journalConference articlepeer-review

Abstract

The work presents application of previously proposed approach for transverse profile forming of high energy electron beams with plastic samples made using 3D printing technology. The collimator made of PLA (polylactide) plastic is designed and produced in a frame of this work. The results of transverse profile forming for 6 MeV electron beam of clinical linear accelerator Elekta Synergy using designed collimator is presented. Obtained results comparison with data from XiO dosimetry planning system shows good agreement of calculated and experimentally formed by plastic collimator electron beam dose fields.

Original languageEnglish
Article number012005
JournalIOP Conference Series: Materials Science and Engineering
Volume1019
Issue number1
DOIs
Publication statusPublished - 20 Jan 2021
Event14th International Forum on Strategic Technology, IFOST 2019 - Tomsk, Russian Federation
Duration: 14 Oct 201917 Oct 2019

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Transverse profile forming for high energy electron beams using 3D-printed plastic samples'. Together they form a unique fingerprint.

Cite this