Theory of constrained cutting

Calculating the stress-strain state in the cutting zone

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A new description of chip formation with a developed plastic-deformation zone is proposed; the tool's geometric parameters are taken into account. A method is proposed for calculating the stress-strain state on the basis of a rigid-plastic model, without hardening of the blank.

Original languageEnglish
Pages (from-to)133-137
Number of pages5
JournalRussian Engineering Research
Volume30
Issue number2
DOIs
Publication statusPublished - Feb 2010

Fingerprint

Hardening
Plastic deformation
Plastics

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

@article{c3bc144572364a9c99b46261b678a313,
title = "Theory of constrained cutting: Calculating the stress-strain state in the cutting zone",
abstract = "A new description of chip formation with a developed plastic-deformation zone is proposed; the tool's geometric parameters are taken into account. A method is proposed for calculating the stress-strain state on the basis of a rigid-plastic model, without hardening of the blank.",
author = "Petrushin, {Sergey Ivanovich} and Proskokov, {A. V.}",
year = "2010",
month = "2",
doi = "10.3103/S1068798X10020085",
language = "English",
volume = "30",
pages = "133--137",
journal = "Russian Engineering Research",
issn = "1068-798X",
publisher = "Allerton Press Inc.",
number = "2",

}

TY - JOUR

T1 - Theory of constrained cutting

T2 - Calculating the stress-strain state in the cutting zone

AU - Petrushin, Sergey Ivanovich

AU - Proskokov, A. V.

PY - 2010/2

Y1 - 2010/2

N2 - A new description of chip formation with a developed plastic-deformation zone is proposed; the tool's geometric parameters are taken into account. A method is proposed for calculating the stress-strain state on the basis of a rigid-plastic model, without hardening of the blank.

AB - A new description of chip formation with a developed plastic-deformation zone is proposed; the tool's geometric parameters are taken into account. A method is proposed for calculating the stress-strain state on the basis of a rigid-plastic model, without hardening of the blank.

UR - http://www.scopus.com/inward/record.url?scp=77952066716&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77952066716&partnerID=8YFLogxK

U2 - 10.3103/S1068798X10020085

DO - 10.3103/S1068798X10020085

M3 - Article

VL - 30

SP - 133

EP - 137

JO - Russian Engineering Research

JF - Russian Engineering Research

SN - 1068-798X

IS - 2

ER -